Silent bushing for swing arm top PU Fiat 124 Spider, Coupé, Berlina - Premium

Silent bushing for swing arm top PU Fiat 124 Spider - Premium

The Premium silent bushings made of polyurethane (PU) are the optimal solution in terms of robustness and durability. The polyurethane is considered to be significantly more durable than the rubber bushings used original and is considerably better protected by the stainless steel sleeve than conventional silent bushings. In addition, due to their higher load capacity, the bushings ensure a track-following and noticeably sportier driving and suspension behaviour.

Note on the installation of polyurethane parts:

When fitting new polyurethane parts to joints, wishbone stabilisers, bushings and other metal parts, the metal parts must be cleaned of rust and rubber residues. Uneven surfaces and sharp edges at the assembly points should be reduced. Damaged and deformed parts should be replaced with new ones.
Before installing the polyurethane parts, the contact points should be coated with lithium grease.
The tightening of the wishbones / swing arms may only be carried out in a "loaded" state (the wheels of the vehicle must not be suspended, the vehicle must stand on the wheels and be compressed a few times before tightening).
Parts made of polyurethane must not come into contact with agents containing acetone or acid.