Products from Diverse
No results were found for the filter!
Art.-Nr. 1160150
25 x 52 x 20.6 mm
€49.95 *
Art.-Nr. 1097027
Material: High-performance silicone VMQ (vinyl-methyl silicone) - peroxide-cured Inner diameter: variously selectable from 4 mm - 51 mm Wall reinforcement: 1-layer fabric insert made of PET Shore hardness-A: 65-75 Application range: -40...
Content 1 Linear metres
€19.90 *
Art.-Nr. 1142234g
Used seat cover for a Fiat 124 Spider DS Euro. Item may differ from picture.
€69.95 *
Art.-Nr. 1082011
Visually similar to item 1082005 Functional car radio with MP3 CD drive, FM/MW tuner with RDS function and MP3-capable USB and SD interface. Bluetooth interface for wireless music playback and for use as a hands-free system. For this...
€159.00 *
Art.-Nr. 1090063
RIBE screwdriver bit for internal wedge profile (Ribe-CV)
€14.00 *
Art.-Nr. 1164176
Plastic bushing for throttle linkage bearing on engine Inner diameter 8mm, length 9mm
€14.95 *
Art.-Nr. 1160024
Thermostat housing AS/CS up to 1974 (not for BS) without thermostat for models with 2 radiator hoses
€47.95 *
Art.-Nr. 1162428
Flywheel with sprocket for 35 mm pilot bearing, 12 mm bore for crankshaft mounting, for 18/2000 78-82, clutch discs diameter 215 mm. The flywheel installed at original has a weight of 8 kg. Therefore, you save a whole 2.62 kg in weight...
€299.95 *
Art.-Nr. 1062430
Adapter for oil filter flange to mount additional sensor. In addition, we need the T-piece article no.: 1162431
€6.95 *
Art.-Nr. 1062431
T piece with 3x M16x1,5 for oil filter flange to mount additional sensor. Additionally we need the T piece article no.:1162430
€12.90 *
Art.-Nr. 1062433
Adapter screw connection M16 x 1.5 external thread to M 14 x 1.5 internal thread with 8 mm through hole. For mounting the originaloil pressure switch or oil pressure sensor in connection with the T-piece (art. no.: 1162431).
€6.95 *
Art.-Nr. 1062434
Adapter screw connection M16x1.5 external thread to M 16x1.5 internal thread in connection with the T piece Art. No.: 1162431
€6.95 *
Art.-Nr. 1164016
The gasket is fitted above and below the spacer no.: 1164051 between the carburettor and the intake manifold. Pay attention to the hole positionbs. Attention for the assembly the gasket need 2x
€3.55 *
Art.-Nr. 1164180g
lower bearing half for early version with fixed throttle linkage up to Bj. 74
€13.25 *
Art.-Nr. 1164182g
Throttle linkage for early version with fixed linkage up to Bj. 74
€89.95 *
Art.-Nr. 1178156
Sealing ring ( o-ring) for oil dipstick automatic gearbox
€8.95 *
Art.-Nr. 1178157
Sealing sleeve for oil dipstick Automatic gearbox to gearbox housing. Attention, there are 2 versions: This or item no.:1178156
€12.95 *
Recently Viewed