No results were found for the filter!
Art.-Nr. 1162515.0
€99.95 *
Art.-Nr. 1162035
Cylinderhead screw M10x1,25x115 external hexagon Thread size: M10 x 1,25mm Length: 115mm Tightening torque 85 nm
€5.95 *
Art.-Nr. 1164113
€3.90 *
Art.-Nr. 1162118
Camshaft sprocket without leading edge for toothed belt
€89.95 *
Art.-Nr. 1162143
Oil pump with short splines for drive Up to chassis no.: 152387 Please note before purchasing: Check the wrench size of the nut/bolt at the front of the crankshaft pulley. If you have a 38 mm wrench size (right-hand thread nut), you need...
€139.95 *
Art.-Nr. 1162174
Oil breather hose for Fiat 124 Spider 2000 carburettor. Can also be used shortened for 1800 carburettors. Length: approx. 540 mm Inner diameter: 20 mm Outer diameter: 26 mm
€9.95 *
Art.-Nr. 1162513.12
From €349.95 *
Art.-Nr. 1162089
Nut (M 20 X 1,5) belt pulley crankshaft front SW 38 right-hand thread 1400-2000 Until Bj. 82 ( from 83 article no.:1162087) 38 nut article no.:1163210
€19.95 *
Art.-Nr. 1162104
€2.95 *
Art.-Nr. 1162116
Made of metal Inner diameter 30 mm
€56.95 *
Art.-Nr. 1162117
Camshaft sprocket inlet with rear leading edge for toothed belt
€49.95 *
Art.-Nr. 1162180
Attention: Overall height 57 mm Illustration similar
€12.49 *
Art.-Nr. 1162207
Length 42 mm Outer diameter 15.05 mm Inner diameter 8 mm With Absatz for valve stem seal
€9.95 *
Art.-Nr. 1162249
Set of bearing shells auxiliary shaft Large bearing: Outside 51 mm Inside 48.5 mm Small bearing: Outside 42.5 mm Inside 39 mm Attention: Follow installation instructions
€49.95 *
Art.-Nr. 1162424
for engine code: Lancia 828.B1.000 Fiat 131 C4.000 - 132AC.000 - 132 B1.000 - 132 C3.000 - 132 C2.000 - 132 C3.031 Ducato 230L 1,9 -230 A2.000 - Ducato 290 1,9 - 149 B1.000 Fiorino Diesel 1,7 - 149 B2.000 Regata Diesel 1,7 - 138 B6.000
€59.95 *
Art.-Nr. 1062535
Fiat 124 Spider 2000 Fiat 130 Berlina/Coupé Lancia Beta Montecarlo
€6.95 *
NEW
NEW
Recently Viewed