No results were found for the filter!
Adjusting disc 1.0 mm slotted for front axle adjustment Fiat 124 Spider, 124 Coupé Art.-Nr. 1172067
Required for adjusting the front axle camber. Dimensions: Thickness: 1 mm Axle mount width: 13 mm
€2.90 *
Adjusting disc 1.5mm slotted for front axle adjustment Fiat 124 Spider, 124 Coupé Art.-Nr. 1172055
Required for adjusting the front axle camber. Dimensions: Thickness: 1.5 mm Width of axle mount: 12 mm
€2.90 *
Adjusting disc 3.0 mm slotted for front axle adjustment Fiat 124 Spider, 124 Coupé Art.-Nr. 1172069
Is needed to adjust the camber of the front axle
€3.25 *
Axle carrier Fiat 124 Spider AS-BS-CS (66-78), Coupé AC-BC-CC (axle body, engine cross member) Art.-Nr. 1172049
Fiat 124 N/S Fiat 124 Coupé/Spider AC/AS 1400 Fiat 124 Coupé/Spider BC/BS 1400 Fiat 124 Coupé/Spider CC/CS 16/1800
€209.95 *
Axle carrier Fiat 124 Spider BS1, Coupé BC1 (axle body, engine cross member) Art.-Nr. 1172050
Fiat 124 Coupé/Spider BC-1/BS-1 with two carburettor system
€259.95 *
Axle nut Front wheel bearing (left-hand thread) Fiat 124, 600, 850, 1100, 1200, 1300, 1500, 125,... Art.-Nr. 1172034
Left-hand thread Fiat 600 T - Fiat 850 T Fiat 11/1200 - Fiat 1100 D/R Fiat 13/1500 - Fiat 1500 C Fiat 12/1500 Cabrio Fiat 124 N/S/Coupe/Spider Fiat 125 - Fiat 131 - Fiat 132 Dimensions: Wrench size (SW): 27 mm Total height: 17 mm...
€3.90 *
Axle nut wheel bearing front, right-hand thread Fiat 124, 125, 131, 132, 600, 850, 1200, 1300, 1500 Art.-Nr. 1172033
For right side in direction of travel. Right-hand thread. D: 27.0 mm d: 16.5 mm H: 17.5 mm Fiat 600 T - Fiat 850 T Fiat 11/1200 - Fiat 1100 D/R Fiat 13/1500 - Fiat 1500 C Fiat 12/1500 Cabrio Fiat 124 N/S/Coupe/Spider Fiat 125 - Fiat 131...
€3.95 *
Bolt for swing arm lower (not Abarth) Fiat 124 Spider (66-85), 124 Coupé, Limousine Art.-Nr. 1172017
€25.95 *
Bolt for upper swing arm Fiat 124 Spider, 124 Coupé, Limousine, 124 Special Art.-Nr. 1172016
€10.95 *
Bracket for stabiliser Bracket for stabilizer rubber, left outside Fiat 124 Spider, Coupéleft... Art.-Nr. 1172045
For left side in direction of travel.
€5.95 *
Bushing for steering lever bracket 4 mm Fiat 1300 - Fiat 1500 - Fiat 124 N Art.-Nr. 1070067
4 mm thick
€3.25 *
Front inner wheel bearing Fiat 124 Spider, 124 Coupé, 124 Berlina, 1100, 1500 Cabrio Art.-Nr. 1172030
Front inner wheel bearing - large tapered roller bearing Front inner wheel bearing: 57x26x19 mm Front outer wheel bearing: 47x18x15 mm Shaft seal: 57x35x10 mm Fiat 1100 - Fiat 1200 Fiat 850 T - Fiat 900 T Fiat 1500 Cabrio Fiat 124 - Fiat...
€17.95 *
Front outer wheel bearing thrust washer Fiat 124 Spider, 124 Coupé, 1100-1200, 1500, Dino - Washer Art.-Nr. 1172037
Fiat 1100 - Fiat 1200 Fiat 1500 - Fiat 1500 Cabrio Fiat 124 - Fiat 124 Coupé Fiat 124 Spider Fiat Dino
€2.95 *
Front suspension spring 37cm Fiat 124 Spider, 124 Coupé Art.-Nr. 1172021
Front spiral spring left or right original. Length: approx. 370 mm Inner diameter: approx. 91 mm Outer diameter: approx. 118 mm
€69.90 *
Front wheel bearing set Fiat 124 Spider, Coupé (one side) Art.-Nr. 1172036
Wheel bearing set front for one side - incl. wheel bearing, oil seal, axle nut - Fiat 124 Spider Content: 1x front axle nut, right-hand thread 1172033 1x front axle nut, left-hand thread 1172034 1x oil seal 1172032 1x bearing outside...
€32.90 *
Front wheel hub Fiat 124 Spider, 124 Coupé, Sedan (without bearing) Art.-Nr. 1172022
Fiat 124 N/S Fiat 124 Coupe Fiat 124 Spider Dimensions: Outer diameter: 117 mm Outer diameter of wheel side: 56 mm Outer diameter of steering knuckle attachment: 65 mm Inner diameter of rim: 47 mm Inner diameter of steering knuckle...
€94.95 *
Grease cap for wheel hub Fiat 124 Spider, 124 Coupé, 124 Berlina, 126, 600, 850 Art.-Nr. 1172035
47mm Ø - galvanised Fiat 126 P - Fiat 126 Bis Fiat 600/D - Seat 770 S Fiat 850 N/S/Coupe/Spider Fiat 124 N/S/Coupe/Spider
€3.95 *
Holder for stabilizer rubber inside right or left bottom small Fiat 124 Spider, 124 Coupé Art.-Nr. 1172047
€8.95 *
Holder for stabilizer rubber inside right or top left large Fiat 124 Spider, 124 Coupé Art.-Nr. 1172046
€8.95 *
Holder for stabilizer rubber right outside Fiat 124 Spider, 124 Coupé, 124 Berlina Art.-Nr. 1172044
€5.95 *
Lower support arm head Fiat 124 Spider, 124 Coupé, 125, 132, 1300-1500, Dino, Argenta Art.-Nr. 1172002
€24.90 *
Recommended
Lowering springs set Fiat 124 Spider, 124 Coupé blue Art.-Nr. 1174034
Note: After installing the springs, the car will sit slightly lower for the first 1000 km. Lowering springs as a set, suitable for all Fiat 124 Spider/Coupé models. Lowers approximately 35 mm. Front spring length: 305 mm Rear spring...
Content 1 Set
€249.95 *
Rubber for shock absorbers Fiat 124 Spider, 124 Coupé, 1300-1500 Art.-Nr. 1172097
Only fits original shock absorbers Dimensions: Outer diameter: 40 mm Inner diameter: 14 mm Height: 15 mm
€2.95 *
Rubber ring for spring front axle top Fiat 124 Spider, 124 Coupé, 124 Berlina Art.-Nr. 1172020
Rubber seat ring front axle spring top 66-85. In conjunction with spring seat ring metal 1172019
€8.90 *
Rubber stop front axle Fiat 124 Spider, Fiat 124 Coupé, Fiat Dino 2000 - rubber buffer Art.-Nr. 1172018
For right or left
€6.90 *
Recommended
Set of silent bushes for lower swing arm PU Fiat 124 Spider, 124 Coupé, Limousine - Premium Art.-Nr. 1172103
Silent bushing for swing arm top PU Fiat 124 Spider, Coupé, Limousine - Premium The Premium silent bushings made of polyurethane (PU) are the optimal solution in terms of robustness and durability. The polyurethane is considered to be...
Content 1 Set
€279.95 *
Recommended
Set of silent bushes for upper swing arm PU Fiat 124 Spider, 124 Coupé, Limousine - Premium Art.-Nr. 1172102
Silent bushing for swing arm top PU Fiat 124 Spider, Coupé, Limousine - Premium The Premium silent bushings made of polyurethane (PU) are the optimal solution in terms of robustness and durability. The polyurethane is considered to be...
€159.95 *
Set of Stabilizer Bushings (PU) – Fiat 124 Spider (1970–82; for 1983–84 models, suitable for... Art.-Nr. 1172104
Scope of Delivery: 2x Stabilizer Bushings Important: For models manufactured between 1970 and 1982, these stabilizer bushings are suitable for use in both inner and outer positions. For model years 1983–84, they are suitable for outer...
€39.95 *
Recently Viewed