No results were found for the filter!
Art.-Nr. 1168001
Brake hose front Length overall approx. 285.0 mm, brake front thread M 10x1.25 2x Cu sealing ring article no.: 1168072 are required for assembly. Fiat 850 S/Coupe/Spider Fiat 850 Sport Coupe /Spider Fiat 124 N/S/Coupe/Spider to VIN...
€16.90 *
Recommended
Art.-Nr. 1164088a
Ribbed rubber hose between air flow meter and intake bridge including screw clamps for fastening. Caution: When installing, tighten the side that goes to the air flow meter only slightly so that you can still pull it off by hand. If you...
€59.95 *
Art.-Nr. 1166068
€19.95 *
Art.-Nr. 1162210
Valve stem seal metal rubber
€2.10 *
Art.-Nr. 1164077
€51.90 *
Art.-Nr. 1114016
Seals on the body with metal reinforcement. Total length: 480cm (enough for 2 doors) Fiat 124 Spider Fiat 850 Spider Fiat 1200/1500 Cabrio Fiat Dino Spider
Content 4.8 Meter (€6.24 * / 1 Meter)
€29.95 *
Recommended
Art.-Nr. 1162043
Seal with reinforced center bars. Can withstand higher pressure and is thermally more resilient. Thickness: 2mm The tightening torque is the same as for the original seal (83 Nm).
€129.90 *
Art.-Nr. 1110112
Height: 10.5 mm Width: 9 mm Depth: 9 mm Colour may vary!
€0.95 *
Art.-Nr. 1142277
Seat belts incl. belt whip (length: 28 cm) Without deflector fitting for B-pillar
€164.95 *
Art.-Nr. 1142278
Seat belts incl. belt whip (length: 28 cm) Without deflector fitting for B-pillar
€164.95 *
Art.-Nr. 1142279
Seat belts incl. belt whip (length: 28 cm) Without deflector fitting for B-pillar
€169.95 *
Art.-Nr. 1168005
Length = approx. 175 mm Thread (both sides): M10 x 1.25 A CU disc (item no. 1168072) is required for mounting on the brake caliper!
€16.90 *
Art.-Nr. 1162123
Timing belt tension roller: 25 x 70.5 x 28 mm Suitable for: Fiat Spider 1600 / 1800 / 2000 Fiat 124 Coupe 1600 / 1800 / 2000 Fiat 124 DS Fiat 125 Fiat 131 Rally / Racing 2000 Fiat 132, Argenta, Lancia Beta
€29.95 *
Art.-Nr. 1162-300
1 piece valve disc Select thickness: 3.00 - 5.20 mm Diameter: 33 mm Fiat 124 - Fiat 125 - Fiat 131 - Fiat 132 Fiat 128 - Fiat X 1/9 Fiat 130 - Fiat Dino 2400
€5.25 *
Recommended
Art.-Nr. 1172089
More durable and resistant rubbers
€6.90 *
Recommended
Art.-Nr. 1172088
More durable and resistant rubber bushing in metal sleeve. Dimensions: Height: 37 mm Outer diameter: 40 mm Outer diameter of body only: 30 mm Inner diameter: 14 mm
€6.90 *
Art.-Nr. 1142147
For right or left, length 60 cm per side
Content 0.6 Meter (€15.83 * / 1 Meter)
€9.50 *
Art.-Nr. 1110123
For fastening sill trim front + rear Height: 7mm Width: 8mm Depth: 7mm
€0.99 *
Art.-Nr. 1162103
Fiat 124 Coupé / Spider Fiat 125 - Fiat 125 S Fiat X 1/9 - Fiat 128
€6.50 *
Art.-Nr. 1168075
Brake booster for models from 66-75 but also from 76-85 with check valve. The VX Volumex is excluded from this.
€179.90 *
Art.-Nr. 1128002
FIAT Emblem enamelled for bonnet, boot lid or radiator grille top Diameter: 59mm
€31.95 *
Art.-Nr. 1128004
Inner diameter: 3 mm Outer diameter: 4.7 mm Depth: 6.2 mm
€0.99 *
Recently Viewed