No results were found for the filter!
Recommended
Art.-Nr. 1162361
Timing belt Kit large for all 2000 models from 79-85 (Not for Volumex VX) 1x Timing belt 148 teeth 1162112 or Timing belt 148 teeth Premium 1162409 1x Tension pulley 1162123 1x Water pump 1160050 or 1160050p 3x Oil seal camshaft/power...
From €132.90 *
Art.-Nr. 1124026
Plastic moulding for 4 mm screw
€1.95 *
Recommended
Art.-Nr. 1128004
Inner diameter: 3 mm Outer diameter: 4.7 mm Depth: 6.2 mm
€0.99 *
Art.-Nr. 1130025
Dimensions: Outer diameter: 55 mm Height: 14 mm Outer diameter of the rear mount: 42 mm Inner diameter of the rear mount: 39 mm Does not fit the following rims: - 1130080 CD 66 (7x13) - 1130081 CD 66 (8x13) - 1130079 CD 30 (5,5x13)
€11.90 *
Art.-Nr. 1162210
Valve stem seal metal rubber
€2.10 *
Art.-Nr. 1164113
€3.90 *
Art.-Nr. 1164112
Inner diameter approx. 22 mm Outer diameter approx. 28 mm
€4.90 *
Art.-Nr. 1168031
Photo "INFO!" only assembly instruction. Brake caliper NOT included in delivery! Set of brake pads for the rear axle.
€25.90 *
Art.-Nr. 1168035
for rear brake callipers Total length: 2020 mm Length of sheathing (2 x): 670 mm each Ø stop (brake calliper): 11 mm Ø sheathing: 10.2 mm Ø cable: 3.5 mm
€25.90 *
Art.-Nr. 1174005
Short strut with large rubber bushes from year of construction '79. Hole spacing: 300 mm
€49.95 *
Art.-Nr. 1176048
Fiat 124 N/S Fiat 124 Coupé BC/CC Fiat 124 Spider BS/CS/DS Fiat 125/S - Fiat 131 Centre bearing, rubber bearing Cardan shaft incl. ball bearing From 69 - 85 All models Hole spacing: 76 mm Inner diameter ball bearing: 25 mm
€49.95 *
Art.-Nr. 1172063
Outer diameter: 44 mm Inner diameter: 14 mm
€3.95 *
Art.-Nr. 1174050
Screw long for mounting compression strut on body Fiat 124 Spider / Coupe / Sedan
€4.75 *
Art.-Nr. 1090045
Dimension d Dimension r Dimension e Dimension a Dimension b Dimension s 12-13 mm m-4 6 mm 10 mm 10 mm 0.5 mm
€0.69 *
Art.-Nr. 1168116
The split pin is fitted 16 times on 124 Spider models up to year of manufacture '84. On the DS from chassis no.: 5506003 and the VX models only 8x on the rear axle,
€0.90 *
Art.-Nr. 1090062
Total length: 52mm Hardness grade 8.8
€5.90 *
Art.-Nr. 1172096
€0.95 *
Art.-Nr. 1174070
Two-part version of the rubber bushing in the push rods for simplified assembly. 4 bushings are required per rod! Made in Italy. Outer diameter: 40 mm Inner diameter: 18 mm Width: 22 mm
€3.49 *
Art.-Nr. 1142257
Diameter: 20 mm Inner diameter: 9 mm Width of middle piece for fastening: 2.5 mm Depth (inside): approx. 16 mm
€3.95 *
NEW
Art.-Nr. 1090151
For example, can be used for camshaft housings on Fiat 124 Spider, Coupé, Special T, 125 Special and 131 (with Lampredi DOHC engines).
€5.25 *
Art.-Nr. 1142147
For right or left, length 60 cm per side
Content 0.6 Meter (€15.83 * / 1 Meter)
€9.50 *
Recently Viewed