Circlip for thru axle 14/16/1800 to 78 Inner diameter: 62mm Outer diameter: 70mm

Price quotation for 1x shock absorber; sold only as a set! Shock absorber AS 1st series 66-68 lower mount for 2 vertical bolts. Alternative: use shock absorber from year of construction: 69 with lower holder article no.:1174029

Price information for 1x shock absorber; Selling as a set only! In combination with "rear shock absorber mount up to 78 Fiat 124 Spider, Coupé - rear axle" (item no. 1174029) can also be used for AS 1st series.

Set of Gas-Pressure Shock Absorbers 2x "Front Gas-Pressure Shock Absorbers (AS/BS/CS/DS) – Fiat 124 Spider" (Item No. 1172039) 2x "Rear Gas-Pressure Shock Absorbers (1969–1985) – Fiat 124 Spider / Coupe" (Item No. 1174032) (Note: For the...

Note: After installing the springs, the car will sit slightly lower for the first 1000 km. Lowering springs as a set, suitable for all Fiat 124 Spider/Coupé models. Lowers approximately 35 mm. Front spring length: 305 mm Rear spring...

Spring seat ring top metal for suspension rear axle directly on spring Additionally article no.:1174037 Rubber ring for spring rear axle top is needed.

Sits directly on body, also requires item no.: 1174036 Spring seat ring metal

Nut differential front right-hand thread M20x1,5 for 124/125/132/Argenta For rear axles where a cover abscan be screwed on at the rear.

Cardan shaft sleeve, connecting piece AS/AC 1. series

Seal for rear axles with rear cover

This is a regenerated differential with selected new parts and adjusted by a specialist. For sporty driving (e.g. Rallye or mountain driving), a differential with a short gear ratio is recommended to achieve faster acceleration. For...

This new part is a Lada spare part. For sporty driving (e.g. Rallye or mountain driving), a differential with a short gear ratio is recommended to achieve faster acceleration. For normal and relaxed driving, a differential with a long...

This is a regenerated differential with selected new parts and adjusted by a specialist. For sporty driving (e.g. Rallye or mountain driving), a differential with a short gear ratio is recommended to achieve faster acceleration. For...

This new part is a Lada spare part. For sporty driving (e.g. Rallye or mountain driving), a differential with a short gear ratio is recommended to achieve faster acceleration. For normal and relaxed driving, a differential with a long...

Running pin Satellite wheel small New

Differential shoulder bearing manufacturer SNR for Fiat 131 124 CS DS from year of construction 82, dimensions: D=66 mm, d=35.6 mm, B=17.9 mm

Upset sleeve for differential Fiat 1300 - Fiat 1500 Fiat 124 N/S Fiat 124 Coupé AC/BC/CC Fiat 124 Spider AS/BS/CS Length: 49mm

Upsetting sleeve from Bj 82 for DS and 131 Length: 18mm

Fiat 124 AC Coupé to VIN 466320 Fiat 124 AS Spider to VIN 466320

Rubber bearing cardan shaft Attention: for the assembly you still need the ball bearing centre bearing article no.: 1176038 and a universal joint article no.: 1176040 Assembly instructions: Caution: When dismantling, make sure that you...

Deep groove ball bearing atdsclosed at the centre D=52mm, d= 25mm, b= 18mm

Fiat 11/1200 - Fiat 13/15/2300 Fiat 12/1500 Cabrio Fiat 124 - Fiat 125 - Fiat 131 - Fiat 132 Fiat Dino 2000 Universal joint for cardan shaft including 4x safety clips Assembly note: Attention: When dismantling, make sure to make precise...

Nut for universal joint socket at the end of the front cardan shaft part Fiat 124 Spider/Coupe M16x1.5

Dimensions: Outer diameter: 74 mm Inner diameter: 60 mm Material thickness: 3 mm

The transmission is a new one from old stock. The 3rd, 4th, and 5th gears have finer gearing, resulting in lower overall noise levels than the original. Compared to the original, the 5th gear has a higher gear ratio by approximately 500...