No results were found for the filter!
Art.-Nr. 1162313
Woodruff key for crankshaft/drivebspinion timing belt all models
€6.29 *
Art.-Nr. 1162314
Washer/Fuse plate For flywheel
€8.75 *
Art.-Nr. 1162315
Disc with 3 lugs and absatz
€35.95 *
Art.-Nr. 1162316
High-strength bolt M10x1,25 for flywheel up to Bj 77
€3.95 *
Art.-Nr. 1162317
Set: 6x high-strength screw M 12 for flywheel 76-85
€95.95 *
Art.-Nr. 1162318
Washer For flywheel
€11.95 *
Flywheel crankshaft Fiat 124 Spider 2000 (82-85) (+€100 deposit)
Art.-Nr. 1162319
Flywheel with ring gear for 32 mm pilot bearing, 12 mm bore for crankshaft mounting, for 2000 82-85, clutch discs diameter 215 mm. This is a regenerated spare part.
€245.95 *
Ring gear for flywheel Fiat 124 Spider (66-70), 124 Coupé, Special T, 125, 132
Art.-Nr. 1162323
Gear rim with 129 teeth
€99.95 *
Art.-Nr. 1162324
Gear rim for flywheel 71-85 134 teeth
€139.95 *
Connecting rod Fiat 124 2000 Spider (79-85) Used
Art.-Nr. 1162325g
For CS2 / CS0 / DS / not VX used
€59.95 *
Art.-Nr. 1110114
Incl. stay bolts for hinges, locking and bracket
€1,390.00 *
Art.-Nr. 1114118
from chassis no. 5506003 for DS/VX BJ.1985 For right side in driving direction.
€19.95 *
Art.-Nr. 1114119
from chassis no. 5506003 for DS/VX BJ.1985 For left side in driving direction.
€19.95 *
Art.-Nr. 1161001
Heat exchanger brass dimensions 250mm x 180mm x 45mm
€159.95 *
Art.-Nr. 1162335
With circlips for piston pin.
€369.00 *
Art.-Nr. 1162330
Scope of delivery: piston set 4 pieces, 4x piston pin, 8 circlips for piston pin Attention ! When using the 3rd compression stage (8mm dome), only fuel with 100 octane should be used ! For Spidern with injection engines, these pistons...
€275.00 *
Art.-Nr. 1162345
Does not fit in the Volumex. Oil dipstick for guide tube
€37.95 *
Guide tube for oil dipstick engine block Fiat 124 Spider 1800 (75-77) - USED
Art.-Nr. 1162170g
Used part screwed version
€39.95 *
Art.-Nr. 1162353
Brass spiral sieve
€7.95 *
Art.-Nr. 1162204
Inner diameter: 19 mm Outer diameter (hose end): 26 mm
€34.95 *
Art.-Nr. 1162362
Length 105,5 mm, shaft diameter 8.0 mm Diameter valve disc 43.5 mm 1x inlet valve
€17.95 *
Art.-Nr. 1162223
Can be used for all 124 Spider/Coupé from 1968-85, as well as Fiat 131 DOHC engines. Can be easily done without any further modifications . 300 degrees 10.35mm stroke Tax times 40-80-80-40 Valve clearance inlet 0.35, outlet 0.40 80...
€449.95 *
Art.-Nr. 1162358
Sport valve springs (set) inside and outside for sport camshafts. Suitable for up to 8,000 rpm. Outer spring Height: 45 mm Outer diameter: 32 mm Inner diameter: 25 mm Inner spring Height: 45 mm Outer diameter: 24 mm Inner diameter: 18 mm
€229.95 *
Art.-Nr. 1162356
Camshaft sprocket inlet without leading edge for toothed belt
€89.95 *
Art.-Nr. 1162354
€2.95 *
Recommended
Art.-Nr. 1178077p
From model year 72 BS1 to DS 85 D=52 d=25 B=21 with ring / B=18 without ring Manufacturer SKF or FAG
€99.95 *
Art.-Nr. 1110115
For right side in direction of travel.
€419.95 *
Recently Viewed