No results were found for the filter!
Art.-Nr. 1164051
Pertinax spacer between carburettor and intake manifold. Please pay attention to the hole positionbs.
€24.95 *
Art.-Nr. 1164016
The gasket is fitted above and below the spacer no.: 1164051 between the carburettor and the intake manifold. Pay attention to the hole positionbs. Attention for the assembly the gasket need 2x
€3.55 *
Art.-Nr. 1164180g
lower bearing half for early version with fixed throttle linkage up to Bj. 74
€13.25 *
Art.-Nr. 1164181g
upper bearing half for early version with fixed throttle linkage up to Bj. 74
€10.25 *
Art.-Nr. 1164182g
Throttle linkage for early version with fixed linkage up to Bj. 74
€89.95 *
Art.-Nr. 1164183
Spring throttle linkage on bulkhead for early version with fixed linkage up to year 74
€9.95 *
Art.-Nr. 1162058
Locking ring for piston pin all models except AS with shrink-on connecting rod. 2 are installed per piston pin
€2.45 *
Art.-Nr. 1162131
€42.75 *
Art.-Nr. 1178156
Sealing ring ( o-ring) for oil dipstick automatic gearbox
€8.95 *
Art.-Nr. 1178157
Sealing sleeve for oil dipstick Automatic gearbox to gearbox housing. Attention, there are 2 versions: This or item no.:1178156
€12.95 *
Art.-Nr. 1142240
We offer you the assembly of our seat covers 1142240 on your seat frames. Three parts are covered per seat: seat, backrest and headrest. Extra work includes: Straightening and possible reinforcement and welding of the seat frames...
€300.00 *
Art.-Nr. 1162432
Oil pan with 2 baffles Dimensions: Length: 459 mm Width: 229-247 mm Height: 125 mm
€194.95 *
Art.-Nr. 1144128
Black lacquered with structure
€339.95 *
Art.-Nr. 1130040g
Fastening: screw washer and fixing ring USED
€25.95 *
Art.-Nr. 1160024g
Thermostat housing AS/CS up to year 1974 (not for BS models) without thermostat for models with 2 radiator hoses USED
€29.95 *
Art.-Nr. 1160025g
Thermostat housing BS/CS1 for models with 4 radiator hoses USED !
€29.95 *
Art.-Nr. 1164185
The bottom of the air filter has no cutout. The cutout can be cut out individually for each carburetor. Dimensions: Length: 165 mm Width: 110 mm Height with nut: 63 mm Height of housing: 46 mm
€64.95 *
Art.-Nr. 1110211
Attention: Item needs to be adjusted! We therefore recommend the following items because the fit is significantly better (because original tools were used for production): 1110232 Inner fender left Fiat 124 Spider (wheel arch trim 2-part...
€199.95 *
Seat rail left with adjustment lever Fiat 124 Spider
Art.-Nr. 1142245
For left side in direction of travel.
€69.95 *
Recently Viewed