No results were found for the filter!
Art.-Nr. 1162130
Screw for fastening camshaft sprocket/power take-off sprocket to camshaft/power take-off sprocket
€12.90 *
Art.-Nr. 1162129
With marking for toothed belt setting 79-85 (straight tips)
€54.90 *
Art.-Nr. 1162131
€42.50 *
Art.-Nr. 1162265
Outer diameter: 23mm Installation diameter: 16 mm Inner diameter: 11mm Height: 10mm
€4.90 *
Art.-Nr. 1162110
Timing belt 144 teeth, width 19 mm for 1400 models 66-71
€29.95 *
Art.-Nr. 1162111
Toothed belt 146 teeth 19 mm wide
€24.95 *
Recommended
Art.-Nr. 1162408
Premium timing belts from Continental
€39.95 *
Recommended
Art.-Nr. 1162409
Premium timing belts from Continental Dimensions: Width: 19 mm
€34.90 *
Art.-Nr. 1162113
Timing belt for VX compressor drive 93 teeth width 25.4 mm
€44.50 *
Art.-Nr. 1162114
Tensioning pulley diameter 70.5 mm, width 33 mm
€59.95 *
Art.-Nr. 1162117
Camshaft sprocket inlet with rear leading edge for toothed belt
€48.00 *
Art.-Nr. 1162356
Camshaft sprocket inlet without leading edge for toothed belt
€98.00 *
Art.-Nr. 1162120
Dimensions: Outer diameter: 67 mm Inner diameter: 25 mm Width: 28 mm
€26.90 *
Art.-Nr. 1162123
Timing belt tension roller: 25 x 70.5 x 28 mm Suitable for: Fiat Spider 1600 / 1800 / 2000 Fiat 124 Coupe 1600 / 1800 / 2000 Fiat 124 DS Fiat 125 Fiat 131 Rally / Racing 2000 Fiat 132, Argenta, Lancia Beta
€29.95 *
Art.-Nr. 1162138
With curved tips
€44.90 *
Art.-Nr. 1162121
€69.90 *
Art.-Nr. 1162115
With inner diameter 29 mm
€55.00 *
Art.-Nr. 1162116
Made of metal Inner diameter 30 mm
€57.00 *
Art.-Nr. 1162225
Camshaft inlet (cam width approx 25 mm)
€175.00 *
Art.-Nr. 1162249
Set of bearing shells auxiliary shaft Large bearing: Outside 51 mm Inside 48.5 mm Small bearing: Outside 42.5 mm Inside 39 mm Attention: Follow installation instructions
€55.00 *
Art.-Nr. 1162472
227 degrees 9.5 mm stroke
€395.00 *
Art.-Nr. 1162222
304 degrees, 10.6 mm stroke timing 42-82-82-42, 84 degrees overlap Valve clearance 0.35mm Outlet and inlet Only suitable for highly modified engines! These camshafts should only be installed in combination with, for example, one...
€450.00 *
Art.-Nr. 1162223
Can be used for all 124 Spider/Coupé from 1968-85, as well as Fiat 131 DOHC engines. Can be easily done without any further modifications . 300 degrees 10.35mm stroke Tax times 40-80-80-40 Valve clearance inlet 0.35, outlet 0.40 80...
€450.00 *
Art.-Nr. 1162495
From €142.90 *
Recommended
Art.-Nr. 1164235
Consists of timing belt for compressor (art. no. 1162113) and tensioning pulley (art. no. 1162114).
€99.95 *
Art.-Nr. 1062635
Abstand 30 cm
€199.00 *
Art.-Nr. 1162488
M10 Total length: 82.4 mm short thread: approx. 11 mm long thread: approx. 33 mm
€6.50 *
Art.-Nr. 1162444g
€119.90 *
Art.-Nr. 1162118
Camshaft sprocket without leading edge for toothed belt
€98.00 *
Art.-Nr. 1162405
With rear leading edge for toothed belt
€49.95 *
Left Mouse-Button | Move Diagram |
[Alt-Button] + Mousewheel | Zooming in Diagram |
Recently Viewed