No results were found for the filter!
Art.-Nr. 1161001
Heat exchanger brass dimensions 250mm x 180mm x 45mm
€159.95 *
Art.-Nr. 1160084
€49.00 *
Art.-Nr. 1160086
€4.95 *
Art.-Nr. 1160059
€23.95 *
Recommended
Art.-Nr. 1160168
Stainless steel water pipe
€42.00 *
Art.-Nr. 1160060
For use with the new heating valve (item no. 1160095), the pipe must be heated and bent approx. 10°.
€24.95 *
Recommended
Art.-Nr. 1160169
Stainless steel water pipe. To use with the new heating valve (item no. 1160095), the pipe must be heated and bent by approx. 10°.
€39.00 *
Art.-Nr. 1160099
Diamond-shaped rubber seal for heating valve and heating pipes of various models Fiat 850 N/, Coupe, Spider Fiat 1100 R Fiat 124 N/S, Coupe, Spider Fiat X 1/9 Fiat Dino Coupe, Spider
€1.75 *
Recommended
Art.-Nr. 1160145
Durable polyurethane seal
€3.95 *
Art.-Nr. 1160098
€2.55 *
Art.-Nr. 1160095
Fiat 124 Spider: all Fiat 124 Coupe: all Fiat Dino Coupe / Spider: all Fiat X 1/9 Hole spacing on the flanges: approx. 36 mm
€24.90 *
Art.-Nr. 1160140
For Fiat 124 Spider and Fiat Dino up to VIN 003958
€23.00 *
Art.-Nr. 1160061
With connection for preheating for all models with automatic cold start and 2000ie to 84 The matching short heating hose is item 1160179.
€49.50 *
Recommended
Art.-Nr. 1160170
Stainless steel reinforced flanges. With side connection for preheating carburettor/injection system. Sits at the front under the manifold.
€79.00 *
Art.-Nr. 1160057
DS from chassis no.: 5506004
€59.00 *
Recommended
Art.-Nr. 1160171
Stainless steel tube with reinforced flange.
€79.00 *
Art.-Nr. 1160100
Dimensions Length approx. 80 x 120 mm Inner diameter: 16 mm Outer diameter: 22 mm Length may vary, can be cut to size.
€9.89 *
Art.-Nr. 1160090
€13.90 *
Art.-Nr. 1160091
External dimensions frame: Length approx. 41.8 mm Width: approx. 15 mm Height including connections: approx. 30.8 mm
€17.90 *
Art.-Nr. 1160165
3 pieces are needed per vehicle
€19.95 *
Art.-Nr. 1160107
€89.00 *
Art.-Nr. 1160134
B-ware: chrome not nice in places, possibly slight bubbles, discolouration, slight spots on the outside. However, on almost all baffles in the middle and thus covered by the handbrake lever. Material : Chrome-plated die-cast aluminium
€49.90 *
Art.-Nr. 1160106
€75.00 *
Art.-Nr. 1160103
We recommend the premium quality (item no. 1160156), as the original, harder rubber often breaks.
€4.25 *
Recommended
Art.-Nr. 1160156
€7.50 *
Art.-Nr. 1160130
When replacing the heater fan motor, the series resistor for the 1st stage of the fan is required.
€10.90 *
Art.-Nr. 1061007
FIAT 124 Spider 1973-1985 FIAT 124 Coupé 1973-1975 FIAT X1/9 1981-1988
€1.90 *
Left Mouse-Button | Move Diagram |
[Alt-Button] + Mousewheel | Zooming in Diagram |
Recently Viewed