With forward and return flow for Fiat 124 Spider

The spring is also suitable for models without a catalytic converter, as the exhaust manifold has two side brackets to which the springs can be attached. Note: Please check your exhaust manifold beforehand to ensure that these two side...

Photo "INFO!" only assembly instruction. Brake caliper NOT included in delivery! Set of brake pads for the rear axle.

Photo "INFO!" only assembly instruction. Brake caliper NOT included in delivery! Premium quality; from well-known manufacturers such as Brembo, Textar, Marelli, ATE etc. with KBA No. Height 39mm, width 108,7 mm, thickness 10 mm

for rear brake callipers Total length: 2020 mm Length of sheathing (2 x): 670 mm each Ø stop (brake calliper): 11 mm Ø sheathing: 10.2 mm Ø cable: 3.5 mm

For left and right front Diameter 48mm

Brake bleeder nipple, bleeder screw M 8 x 1.25 for brake caliper

Tie rod end left-hand thread M 14 x 1 Length overall: 94 mm Fiat 500 F/R - Fiat 500 F Giardiniera Fiat 126 - Fiat 126 P Fiat 600 D from VIN 1717594 - Seat 770 S Fiat 850 N/S/Coupe/Spider Fiat 124 N/S - Fiat 124 Coupe/Spider Lancia Beta

Price quotation for 1x shock absorber; sold only as a set!

Price quotation for 1x shock absorber; sold only as a set!

Sits directly on body, also requires item no.: 1174036 Spring seat ring metal

Hardy disc joint disc for cardan shaft / gearbox Fiat 124 N/S/Coupé/Spider Fiat 125 - Fiat 125 S Fiat 131 - Fiat 132 - Fiat Argenta Dimensions: Outer diameter: 130 mm Inner diameter: 50 mm Width: 61 mm

Consists of: 1x 1178012 Gearbox seals 1x 1178021 Oil seal front gearbox Fiat 124 Spider 14/16/1800 (66-78) 1x 1178022 Oil seal front gearbox Fiat 124 Spider 2000 1x 1178023 Oil seal rear gearbox Fiat 124 Spider all types

Gear lever boot on top of manual transmission Fiat 124 Spider & Fiat 124 Coupe 69-85

5-piece fastening set for gear lever, colours may vary.

Clutch kit 3-piece Fiat 124 Spider 1600/1800/2000 (Not for Volumex VX) 215mm diameter Consists of: 1x 1180009 clutch disc 1x 1180006 clutch pressure plate 1x 1180017 release bearing

Height: 10.5 mm Width: 9 mm Depth: 9 mm Colour may vary!

Brass spiral sieve

Solid disc diameter 227.5 mm, height 46mm, brake disc thickness 10.8 mm, wear dimension 9 mm Suitable for rear for all Fiat 124 Spider! Front for AS BS CS DS up to chassis no.: 5506002! For use on the rear axle of the 124 Spider Volumex,...

Reinforced version Cardan shaft/gearbox for Fiat 124/125/131/132/Argenta

Outer diameter: 44 mm Inner diameter: 14 mm

Price quotation for 1x shock absorber; sold only as a set! For Fiat 124 Spider/Coupe 68 - 85

Price information for 1x shock absorber; Selling as a set only! In combination with "rear shock absorber mount up to 78 Fiat 124 Spider, Coupé - rear axle" (item no. 1174029) can also be used for AS 1st series.

Fastening bracket spring bonnet stand Fiat 124 Coupe. Attention for Fiat 124 Spider: The bracket is different from the original and can be used alternatively. The hole must be adjusted!

Dimensions: Thread diameter: 5 mm Total length: 21 mm Pitch: 0.8 mm Head diameter: 9.2 mm Head height: 2.5 mm Standards: DIN 966 Head shape: Raised countersunk head Drive type: Phillips Thread type: Metric thread

Timing belt Kit large for all 2000 models from 79-85 (Not for Volumex VX) 1x Timing belt 148 teeth 1162112 or Timing belt 148 teeth Premium 1162409 1x Tension pulley 1162123 1x Water pump 1160050 or 1160050p 3x Oil seal camshaft/power...

3 pieces are needed per vehicle