No results were found for the filter!
Art.-Nr. 1130079
Fiat 124 Spider can only be used up to chassis no.: 5506003. Not for DS year of construction '85 and VX with large brake! Alloy wheel CD30 Style incl. hub cap, 5,5x13 Size: 5,5x13 Bolt circle: 4x98 mm Offset: 7 mm Centre hole: 58,6 mm...
Content 1 Piece
From €189.95 *
Art.-Nr. 1172104
Polyurethane (PU) is a very durable and resilient material. The rubbers offer a stable and sporty driving experience.
€39.95 *
Art.-Nr. 1142257
Diameter: 20 mm Inner diameter: 9 mm Width of middle piece for fastening: 2.5 mm Depth (inside): approx. 16 mm
€3.95 *
Art.-Nr. 1114013
Set of rubber profile felted on the inside 2x piping for door mouldings + 2x piping for hood trim mouldings length: 250 cm Profile: 9 x 11 mm Thickness: 2.8 mm
Content 2.5 Linear metres (€7.96 * / 1 Linear metres)
€19.90 *
Art.-Nr. 1114076
chromed The mirror can also be mounted on the left side. The asymmetry is hardly noticeable. Fiat 850 Spider USA Fiat 124 Spider USA until 1978 Alfa Romeo Giulietta Spider
€54.90 *
Art.-Nr. 1114100
This rubber cap for the B-pillar is for models built from 1979 onwards. Here the water drainage on the soft top linkage has been changed and replaced by a plastic water box under the soft top linkage behind the rear side panel. The water...
€20.95 *
Art.-Nr. 1116019
Rubber profile for both sides. Sales unit is a set, i.e. for left and right. Length 70cm each
Content 1.4 Linear metres (€9.25 * / 1 Linear metres)
€12.95 *
Art.-Nr. 1124009
Length 135 cm
Content 1.35 Linear metres (€5.15 * / 1 Linear metres)
€6.95 *
Art.-Nr. 1122022
Compact connector with 6 slots, 5 of which are occupied Hole spacing 44 mm Fiat 850 Sport Spider Fiat 124 Spider AS/BS/BS-1 up to chassis number: 1832543 Fiat 124 Coupe AC/BC Fiat X 1/9 1300
€144.95 *
Art.-Nr. 1122019
Fiat 500 F/R - Fiat 850 N/S/Coupe Fiat 124 Coupe / Spider Fiat Dino Spider 3mm hose is required
€11.90 *
Art.-Nr. 1126010
Steel, galvanised For right side in direction of travel.
€42.95 *
Art.-Nr. 1140044
Without Abstyre rubber, without fastening strip. For left side in direction of travel.
€65.95 *
Art.-Nr. 1152024
For right side in direction of travel.
€19.95 *
Art.-Nr. 1142176
Length: 32 cm The chrome piping should be heated slightly with a hairdryer before fitting to prevent it from breaking during installation!
Content 0.32 Meter (€17.97 * / 1 Meter)
€5.75 *
Art.-Nr. 1160035
€15.90 *
Art.-Nr. 1162163
Oil dipstick with rubber guide
€13.95 *
Art.-Nr. 1162169
Fiat 500 - Fiat 126 - Fiat 600 - Fiat 850 Fiat 127 - Fiat 128 - Fiat X 1/9 Fiat 124 N/S/Coupe/Spider Fiat 125 - Fiat 125 S Fiat 131 - Fiat 132 Fiat 238 Fiat 11/1200 - Fiat 1200 Cabrio
€3.95 *
Art.-Nr. 1162172
Wide end Inner diameter: 16 mm Outer diameter: 23 mm Narrow end Inner diameter: 14 mm Outer diameter: 21 mm
€5.95 *
Art.-Nr. 1164093
Fiat 124 Coupe BC-1 Fiat 124 Spider BS-1 Fiat 124 Spider CSA 378 x 233 x 65
€49.95 *
Art.-Nr. 1164022
Hose has a slightly different shape, but is easy to install. Outer diameter: 58 mm Inner diameter: 48 mm
€15.95 *
Art.-Nr. 1166009
Exhaust pipe rear 1600/1800 CS 72-75 (also 2000) Fiat 124 Spider / Endssilencer This silencer can also be used for 2000 Fiat 124 Spider exhaust systems, but an adapter to the middle silencer is necessary. You will find this at the bottom...
€159.90 *
Art.-Nr. 1166010
This adapter makes it possible to fit an 1800 CS rear silencer to a 2000 exhaust system. (Intermediate piece from 54 mm pipe to 45 mm pipe) The adapter is welded onto the pre-silencer.
€26.95 *
Art.-Nr. 1166028
Gasket with additional duct for exhaust gas recirculation at the front
€13.95 *
Recently Viewed