Tuning - Fiat 124 Spider

Chrome-plated metal ring for Veglia Borletti instruments Outer diameter: 56mm Inner diameter: 44.5mm Height: 5mm Fiat 124 Spider AS, BS, CS, DS Fiat 124 Coupe AC, BC, CC

Chrome-plated metal ring for Veglia Borletti instruments Outer diameter: 103mm Inner diameter: 90mm Height: 6mm Fiat 124 Spider AS, BS, CS, DS Fiat 124 Coupe AC, BC, CC

Seal with reinforced center bars. Can withstand higher pressure and is thermally more resilient. Thickness: 2mm The tightening torque is the same as for the original seal (83 Nm).

Photo "INFO!" only assembly instruction. Brake caliper NOT included in delivery! Premium quality; from well-known manufacturers such as Brembo, Textar, Marelli, ATE etc. with KBA No. Height 39mm, width 108,7 mm, thickness 10 mm

Suitable for all Fiat 124 Spider/Coupé from AS/AC 2nd series to CS0/CC (1969-82). Polyurethane (PU) is a very durable and resistantdsmaterial. The bushings provide a true-to-track and sporty driving performance. Note on installation for...

Reinforced version Cardan shaft/gearbox for Fiat 124/125/131/132/Argenta

Overhaul kit rear axle PU bushings red Fiat 124 Spider Consisting of: 4x bushing for longitudinal strut, 4x bushing for shockbsstrut, 2x bushing for anti-roll bar and 4x bushing for upper shock absorber. Polyurethane (PU) is a very...

The lowering springs lower the Spider by around 35 mm. Dimensions: Front Length: 30.7 mm Diameter: 11.5 mm Spring wire diameter: 12 mm Rear Length: 45.2 mm Diameter: 12.8 mm Spring wire diameter: 12 mm

Polyurethane (PU) is a very durable and resilient material. The rubbers offer a stable and sporty driving experience. Dimensions: Inner diameter: 14 mm Outer diameter: 41 mm

Wheel spacers Fiat 124 Spider for front and rear front 7,5mm per wheel, rear 15mm per wheel, wheel bolt shaft length 44mm, thread length 42mm incl. expert opinion for registration

bsCylinder head gasket For engine type 125 (recognisable by a larger gap between cylinder 2 and 3) 1400/1600 (piston diameter 80mm). Special production reinforced for engine type: 124AC000,124C000,125A000, 125B00 Thickness: 1,7 mm

The K&N replacement air filter. THE ORIGINAL HIGH-FLOW AIR FILTER: K&N is the inventor and manufacturer of the ORIGINAL and still the best washable and reusable high-performance air filter. Each air filter is designed for more power and...

304 degrees, 10.6 mm stroke timing 42-82-82-42, 84 degrees overlap Valve clearance 0.35mm Outlet and inlet Only suitable for highly modified engines! These camshafts should only be installed in combination with, for example, one or two...

Installed directly on the gearbox. Matching front silencer order number: 1166008 Without ABE Pipe diameter: Manifold: 38.5 mm outside 37 mm inside Y-pipe: 46 mm outside 42 mm inside Y-pipe before merging: 40 mm outside 36 mm inside

The Sportbrake pads are suitable for road use as well as for Rallye, hill climbs, etc. Aramid brake pad for more braking power Full braking power even when the brakes are cold little and non-aggressive brake dust (very easy to remove)...

Photo "INFO!" only assembly instruction. Brake caliper NOT included in delivery! The Sportbrake pads are suitable for road use, as well as for Rallye, hill climbs etc. Aramid brake pad for more braking power Full braking power even when...

Spacer washer with originalen Dimensions Fiat 124 Spider / Coupe 66-84 Width 5 mm, inner diameter 58.1mm bolt circle 4 x 98 Illustration may differ!

Electric power steering with TÜV certificate. The kit also includes a speed signal sensor, as there are different speedometer cable types, please note whether the upper speedometer cable connection is a quick release or a screw cap....

Lowering springs as a set suitable for all Fiat 124 Spider/Coupé Approx. 35mm lower Manufacturer: Vogtland with Tüv certificate Colour: blue Spring length front: 305mm Spring length rear: 445mm NOW NEW: With resonance damper (prevents...

Can be used for all 124 Spider/Coupé from 1968-85, as well as Fiat 131 DOHC engines. Can be easily done without any further modifications . 300 degrees 10.35mm stroke Tax times 40-80-80-40 Valve clearance inlet 0.35, outlet 0.40 80...

Sport valve springs (set) inside and outside for sport camshafts. Suitable for up to 8,000 rpm. Outer spring Height: 45 mm Outer diameter: 32 mm Inner diameter: 25 mm Inner spring Height: 45 mm Outer diameter: 24 mm Inner diameter: 18 mm

The Sportbrake pads are suitable for road use as well as for Rallye, hill climbs, etc. Aramid brake pad for more braking power Full braking power even when the brakes are cold little and non-aggressive brake dust (very easy to remove)...

Make your engine bay stand out, both visually and performance-wise, with this high-performance ignition cable set. Flame-Thrower 7mm MAGx2 cables offer the igndstrom 2 ways to reach its target for reliability and redundancy. A low...

Foam-reinforced tarpaulin made of synthetic leather, hand-made in our saddlery. Sold without tarpaulin shoes and hooks.

Foam-reinforced tarpaulin made of synthetic leather, hand-made in our saddlery. Sold without tarpaulin shoes and hooks. The snap fastener set for tarpaulin (item no. 1090048) is suitable for installation.

Make your engine bay stand out, both visually and performance-wise, with this high-performance ignition cable set. Flame-Thrower 7mm MAGx2 cables offer the igndstrom 2 ways to reach its target for reliability and redundancy. A low...

Bolt circle 6 x 54 mm

Sportbrake disc for Fiat 124 Spider (all models). The brake disc is not suitable for use in road traffic!

Silent bushing for swing arm top PU Fiat 124 Spider, Coupé, Limousine - Premium The Premium silent bushings made of polyurethane (PU) are the optimal solution in terms of robustness and durability. The polyurethane is considered to be...