No results were found for the filter!
Art.-Nr. 1162515.0
€99.95 *
Art.-Nr. 1162-300
1 piece valve disc Select thickness: 3.00 - 5.20 mm Diameter: 33 mm Fiat 124 - Fiat 125 - Fiat 131 - Fiat 132 Fiat 128 - Fiat X 1/9 Fiat 130 - Fiat Dino 2400
€5.25 *
Art.-Nr. 1162035
Cylinderhead screw M10x1,25x115 external hexagon Thread size: M10 x 1,25mm Length: 115mm Tightening torque 85 nm
€5.95 *
Art.-Nr. 1062678
Diameter 33 mm from 3.25 mm to 4.90 mm 2 discs each in sorting box with magnet Fiat 124 - 125 - 131 - 132 128 - 130 - 2400 Fiat Fiat Fiat Fiat Fiat X 1/9 Fiat Fiat Dino
€159.95 *
Art.-Nr. 1162123
Timing belt tension roller: 25 x 70.5 x 28 mm Suitable for: Fiat Spider 1600 / 1800 / 2000 Fiat 124 Coupe 1600 / 1800 / 2000 Fiat 124 DS Fiat 125 Fiat 131 Rally / Racing 2000 Fiat 132, Argenta, Lancia Beta
€29.95 *
Art.-Nr. 1162030
€7.50 *
Art.-Nr. 1162022
Engine seal set with shaft seals for engine code 132C2.040 We highly recommend ordering the reinforced cylinder head gasket (item no. 1162043) and installing it instead of the one included in the gasket set! The reinforced seal can...
€86.95 *
Art.-Nr. 1162118
Camshaft sprocket without leading edge for toothed belt
€89.95 *
Art.-Nr. 1162120
Dimensions: Outer diameter: 67 mm Inner diameter: 25 mm Width: 28 mm
€26.90 *
Art.-Nr. 1162143
Oil pump with short gearing for drive Up to chassis no.:152387 Can also be used with 1162145, difference: longer toothing, can be used without problems.
€139.95 *
Art.-Nr. 1162148
Original used, stripped, straightened and repainted. Dimensions: Length: 453mm Width: 228-248mm Height: 125mm
€169.95 *
Art.-Nr. 1164018
WEBER 32 ADFA 75-77 carburettor idle shut-off valve with M10x1 thread
€28.95 *
Art.-Nr. 1162348
€12.90 *
Art.-Nr. 1162174
Oil breather hose for Fiat 124 Spider 2000 carburettor. Can also be used shortened for 1800 carburettors. Length: approx. 540 mm Inner diameter: 20 mm Outer diameter: 26 mm
€9.95 *
Art.-Nr. 1162513.12
From €349.95 *
Art.-Nr. 1162089
Nut (M 20 X 1,5) belt pulley crankshaft front SW 38 right-hand thread 1400-2000 Until Bj. 82 ( from 83 article no.:1162087) 38 nut article no.:1163210
€19.95 *
Art.-Nr. 1162102
€2.95 *
Art.-Nr. 1162104
€2.95 *
Art.-Nr. 1162116
Made of metal Inner diameter 30 mm
€56.95 *
Art.-Nr. 1162117
Camshaft sprocket inlet with rear leading edge for toothed belt
€49.95 *
Art.-Nr. 1162142
Oil pump incl. oil pump seal for 1800 US models Fiat 124 Spider 1800 USA Fiat 131 Super 1600 Fiat 132/1600
€124.95 *
Art.-Nr. 1162160
Fiat 126 Bis - Fiat 127 - Fiat 128 - Fiat 238 Fiat 124 N/S/Coupe/Spider Fiat 125 - Fiat 131 - Fiat 132 Fiat 1800 B - Fiat 2300 Berlina/Coupe Fiat Dino 2400 Coupe/Spider Lancia Beta - Lancia Gamma Alfa 155 - Alfa 164
€11.90 *
Art.-Nr. 1162169
Fiat 500 - Fiat 126 - Fiat 600 - Fiat 850 Fiat 127 - Fiat 128 - Fiat X 1/9 Fiat 124 N/S/Coupe/Spider Fiat 125 - Fiat 125 S Fiat 131 - Fiat 132 Fiat 238 Fiat 11/1200 - Fiat 1200 Cabrio
€3.95 *
Art.-Nr. 1162207
Length 42 mm Outer diameter 15.05 mm Inner diameter 8 mm With Absatz for valve stem seal
€9.95 *
Art.-Nr. 1162210
Valve stem seal metal rubber
€2.10 *
Art.-Nr. 1162249
Set of bearing shells auxiliary shaft Large bearing: Outside 51 mm Inside 48.5 mm Small bearing: Outside 42.5 mm Inside 39 mm Attention: Follow installation instructions
€49.95 *
Art.-Nr. 1162314
Washer/Fuse plate For flywheel
€8.75 *
Art.-Nr. 1162223
Can be used for all 124 Spider/Coupé from 1968-85, as well as Fiat 131 DOHC engines. Can be easily done without any further modifications . 300 degrees 10.35mm stroke Tax times 40-80-80-40 Valve clearance inlet 0.35, outlet 0.40 80...
€449.95 *
Art.-Nr. 1162354
€2.95 *
Art.-Nr. 1090049
Thread adapter M8 x 1.25 x 35 to M10 x 1.5 x 20 Total length 55mm For example, can be used for camshaft housings on Fiat 124 Spider, Coupé, Special T, 125 Special and 131 (with Lampredi DOHC engines).
€5.25 *
Recently Viewed