No results were found for the filter!
Recommended
Art.-Nr. 1160170
Stainless steel reinforced flanges. With side connection for preheating carburettor/injection system. Sits at the front under the manifold.
€79.95 *
Recommended
Art.-Nr. 1160171
Stainless steel tube with reinforced flange.
€79.95 *
Art.-Nr. 1110200o
NOS
€239.95 *
Art.-Nr. 1110201o
€219.95 *
Art.-Nr. 1186168
New old Stock
€99.95 *
Art.-Nr. 1144141
with 3 fixing screws
€86.95 *
Art.-Nr. 1086034
€78.00 *
Art.-Nr. 1178172
The lower part of the gearstick lever is approx. 65 mm shorter than item no.: 1178031. It is "new old stock".
€119.95 *
Art.-Nr. 1178173g
This is a USED spare part! The lower part of the gearstick lever with 2 balls, 1 x plastic at the bottom, 1 x metal at the top, was used from the first 5-speed gearboxes up to model year 72.
€112.95 *
Art.-Nr. 1178174g
This is a USED spare part! The ball seat is made of plastic. It was used from the first 5-speed gearboxes up to model year 72.
€29.95 *
Art.-Nr. 1186170
Includes rubber base, socket and cable. Bulb not included. Illuminant: Article no.: 1086009 Drill hole diameter in mudguard: 22 mm
€24.95 *
Art.-Nr. 1150043
Fiat 124 N/S/Spider/Coupé Fiat 500 N/D/F/L/R Fiat 126 - Fiat 126 P Fiat 600/D - Seat 770 S Fiat 850 N/S/Coupé/Spider
€1.75 *
Art.-Nr. 2460002
Fiat 1500 C - Fiat 1500 L from 1964 Fiat 1500 Cabrio 118 K Fiat 1800 B - Fiat 2300 - Fiat 2300 S Coupe
€109.90 *
Art.-Nr. 2460003
Fiat 13/1500 until 1963 Fiat 1500 L until 1963 Fiat 1500 Cabrio 118 H Fiat 1800
€59.50 *
Art.-Nr. 1090085
Fixing clip 11 x 11 mm for body cut-out 8 x 8 mm, sheet thickness 2.5 mm
€1.00 *
Art.-Nr. 1028003
Single crown for Pininfarina emblem Height 12.5 mm, width 19 mm
€12.00 *
Art.-Nr. 1784001
Zündspuhle Bosch red with series resistor no. 0 221 119 031
€140.00 *
Art.-Nr. 1090091
Stud bolt M8 x 42 1st side 14mm thread 2nd side 20mm thread
€4.45 *
Art.-Nr. 1182072
Frame for warning light switch (1182004 and 1182005) black for BS/BS1/CS/CS1 72-78 Reproduction 3D print
€9.95 *
Recently Viewed