No results were found for the filter!
Art.-Nr. 1162097
Standard, set (8 pieces) 1800/2000 engine (front crankshaft with pulley for several belts)
€49.95 *
Art.-Nr. 1162098
1. oversize - 0,254 mm, set (8 pieces) engine type 123 1800/2000ccm ( pulley on crankshaft for several belts )
€85.95 *
Art.-Nr. 1162099
€39.95 *
Art.-Nr. 1162100
Set of thrust washers for crankshaft (1st oversize) For engines with 1438 cc and 1608 cc displacement.
€49.95 *
Art.-Nr. 1162115
With inner diameter 29 mm
€55.95 *
Art.-Nr. 1162116
Made of metal Inner diameter 30 mm
€56.95 *
Art.-Nr. 1162117
Camshaft sprocket inlet with rear leading edge for toothed belt
€49.95 *
Art.-Nr. 1162121
€69.95 *
Art.-Nr. 1162129
With marking for toothed belt setting 79-85 (straight tips)
€54.95 *
Art.-Nr. 1164073
Vane pump incl. mounting material can be used for Fiat 124 Spider up to year of construction 79. Attention: If your pump is defective, be sure to check whether there is rust or other impurities in your tank, as the fuel is only cleaned...
€49.95 *
Art.-Nr. 1164066
Fiat 124 Coupe/Spider 1400 as of 07/1967 Mechanical fuel pump for AS 1400 carburettor models. With long lever (63 mm, measured from flange).
€36.95 *
Art.-Nr. 1164070
2x seals article no.: 1162133 are required for assembly.
€9.95 *
Art.-Nr. 1164065
Mechanical fuel pump for CS2 2000 carburettor models. Alternatively electric fuel pump for carburettor models Art. No. 1164073 Advantage: Fuel is always immediately available at the carburettor and the annoying "georgele" until fuel...
€42.95 *
Art.-Nr. 1162143
Oil pump with short splines for drive Up to chassis no.: 152387 Please note before purchasing: Check the wrench size of the nut/bolt at the front of the crankshaft pulley. If you have a 38 mm wrench size (right-hand thread nut), you need...
€139.95 *
Art.-Nr. 1162145
Oil pump with long splines, oil pump drive Note before purchasing: Check the wrench size of the nut/bolt at the front of the crankshaft pulley. If you have a 38 mm wrench size (right-hand thread nut), you need the oil pump with item...
€229.95 *
Art.-Nr. 1162146
Height 48 mm
€19.90 *
Art.-Nr. 1162148
Original used, stripped, straightened and repainted. Dimensions: Length: 453mm Width: 228-248mm Height: 125mm
€169.95 *
Art.-Nr. 1162154
Oil drain plug Allen with flange for sealing ring
€4.75 *
Art.-Nr. 1162157
Dimensions: Length: 452 mm Width: 602 mm Pipe outer diameter: 24 mm Pipe inner diameter: 22 mm Material thickness: 4 mm Depth: 14 mm
€119.95 *
Art.-Nr. 1162158
Dimensions: Length: 452 mm Width: 602 mm Pipe outer diameter: 24 mm Pipe inner diameter: 22 mm Material thickness: 4 mm Depth: 14 mm
€119.95 *
Art.-Nr. 1162161
Temperature sensor with thread M16x1,5 SW 19mm
€29.95 *
Art.-Nr. 1162171
Wide end Inner diameter: 18 mm Outer diameter: 25 mm Narrow end Inner diameter: 9.5 mm Outer diameter: 22 mm
€5.75 *
Art.-Nr. 1162172
Wide end Inner diameter: 16 mm Outer diameter: 23 mm Narrow end Inner diameter: 14 mm Outer diameter: 21 mm
€5.95 *
Recommended
Art.-Nr. 1162182
Oil filter flange: Part milled from the solid. Visually similar to the original. Fasten with original screws! Clearly our recommendation!
€269.95 *
Recently Viewed