No results were found for the filter!
Recommended
Art.-Nr. 1162442
For detailed instructions on changing the timing belt on the FIat 124 Spider, click here. Large timing belt kit for all 1800 models 1x timing belt 146 teeth 1162111 or timing belt 146 teeth premium 1162408 1x tension pulley 1162123 1x...
From €129.90 *
Art.-Nr. 1130079
Fiat 124 Spider can only be used up to chassis no.: 5506003. Not for DS year of construction '85 and VX with large brake! Alloy wheel CD30 Style incl. hub cap, 5,5x13 Size: 5,5x13 Bolt circle: 4x98 mm Offset: 7 mm Centre hole: 58,6 mm...
Content 1 Piece
From €189.95 *
Art.-Nr. 1172104
Polyurethane (PU) is a very durable and resilient material. The rubbers offer a stable and sporty driving experience.
€39.95 *
Art.-Nr. 1142257
Diameter: 20 mm Inner diameter: 9 mm Width of middle piece for fastening: 2.5 mm Depth (inside): approx. 16 mm
€3.95 *
Art.-Nr. 1042193
Fiat 500 D/F/L/R Fiat 126 - Fiat 126 P Fiat 600 D
€4.00 *
Art.-Nr. 1068042
Fiat 1100 D - Fiat 1100 R Fiat 1500 S Coupé/Cabrio Fiat 238
€3.90 *
Art.-Nr. 1068053
Fiat 1100 D Fiat 1100 R Fiat 238
€7.95 *
Art.-Nr. 1072020
€4.95 *
Art.-Nr. 1084026
Short thread Fiat 500 N/D/F/R - Fiat 500 Giardiniera Fiat 126 - Fiat 126 P Fiat 600 - Fiat 600 D Fiat 1100/1200
€4.99 *
Art.-Nr. 5072013
Fiat 500 N/D/F/R Fiat 500 Giardiniera
€4.37 *
Art.-Nr. 1090179
Hole size 4.6 - 4.7 mm Pin length max. 11 mm Pin diameter 2.8 mm Fastening thickness 0.80-0.90 mm Material: transparent polyethylene (PE) Suitable for lettering / emblems from e.g. AUDI 80, AUDI 100 VW T3, SCIROCCO, GOLF, PASSAT, POLO...
€0.95 *
Art.-Nr. 1114013
Set of rubber profile felted on the inside 2x piping for door mouldings + 2x piping for hood trim mouldings length: 250 cm Profile: 9 x 11 mm Thickness: 2.8 mm
Content 2.5 Linear metres (€7.96 * / 1 Linear metres)
€19.90 *
Art.-Nr. 1114076
chromed The mirror can also be mounted on the left side. The asymmetry is hardly noticeable. Fiat 850 Spider USA Fiat 124 Spider USA until 1978 Alfa Romeo Giulietta Spider
€54.90 *
Art.-Nr. 1114100
This rubber cap for the B-pillar is for models built from 1979 onwards. Here the water drainage on the soft top linkage has been changed and replaced by a plastic water box under the soft top linkage behind the rear side panel. The water...
€20.95 *
Art.-Nr. 1116019
Rubber profile for both sides. Sales unit is a set, i.e. for left and right. Length 70cm each
Content 1.4 Linear metres (€9.25 * / 1 Linear metres)
€12.95 *
Art.-Nr. 1124009
Length 135 cm
Content 1.35 Linear metres (€5.15 * / 1 Linear metres)
€6.95 *
Art.-Nr. 1122022
Compact connector with 6 slots, 5 of which are occupied Hole spacing 44 mm Fiat 850 Sport Spider Fiat 124 Spider AS/BS/BS-1 up to chassis number: 1832543 Fiat 124 Coupe AC/BC Fiat X 1/9 1300
€144.95 *
Art.-Nr. 1122019
Fiat 500 F/R - Fiat 850 N/S/Coupe Fiat 124 Coupe / Spider Fiat Dino Spider 3mm hose is required
€11.90 *
Art.-Nr. 1126010
Steel, galvanised For right side in direction of travel.
€42.95 *
Art.-Nr. 1140044
Without Abstyre rubber, without fastening strip. For left side in direction of travel.
€65.95 *
Art.-Nr. 1152024
For right side in direction of travel.
€19.95 *
Art.-Nr. 1142176
Length: 32 cm The chrome piping should be heated slightly with a hairdryer before fitting to prevent it from breaking during installation!
Content 0.32 Meter (€17.97 * / 1 Meter)
€5.75 *
Art.-Nr. 1160035
€15.90 *
Art.-Nr. 1162163
Oil dipstick with rubber guide
€13.95 *
Recently Viewed