No results were found for the filter!
Art.-Nr. 1162402
Attention! When using the 3rd compression stage (8 mm dome), only 100 octane fuel should be used! These pistons should not be used on spiders with injection engines, as damage can occur due to ringing! We also strongly recommend using a...
€419.95 *
Art.-Nr. 1174062
Hole spacing: 614 mm Fiat 124 Coupe BC/CC 16/1800 Fiat 124 Spider BS/CS 16/1800
€99.95 *
Art.-Nr. 1168137
For DS with rack and pinion steering, not for VX! For right side in direction of travel.
€149.95 *
Art.-Nr. 1168138
For DS with rack and pinion steering, not for VX. For left side in direction of travel.
€139.95 *
Recommended
Art.-Nr. 1168135
For right side in direction of travel.
€78.95 *
Art.-Nr. 1168136
For left side in direction of travel.
€78.95 *
Art.-Nr. 1144125g
Housing with lever, flap and ventilation nozzle used
€24.95 *
Art.-Nr. 1160032g
Engine cooling water housing at front of cylinder head for 1979 CS2 with bore for thermosensor
€59.95 *
Art.-Nr. 1160027g
Aluminium cylinder head housing, front 2000ie 81-85 Fiat 124 Spider with preheating hoses
€65.95 *
Art.-Nr. 1130065
Diameter: Outside: 168 mm Inside: 156 mm
€159.95 *
Art.-Nr. 1130066
€159.95 *
Art.-Nr. 1130068
Fiat 124 Coupé CC Fiat 124 Spider CS Fiat 131 Outer diameter: 249 mm Inner diameter: 236 mm
Content 1 Set
€109.95 *
Art.-Nr. 1130067
Outer diameter: 249 mm Inner diameter: 236 mm
€113.95 *
Art.-Nr. 1084004
Material: PP (polypropylene), silicone Resistance [Ohm]: 1000 Ignition cable: Connection type wood screw Ignition coil: DIN connection, waterproof Ignition distributor/rotor: watertight BREMI: Connector, ignitionds pule Manufacturer: BREMI
€7.95 *
Recently Viewed