No results were found for the filter!
Adapter M14x1,5 to M 16x1,5 (for oil filter flange Fiat 124 Spider ) Art.-Nr. 1062430
Adapter for oil filter flange to mount additional sensor. In addition, we need the T-piece article no.: 1162431
€6.95 *
T piece 3x M16x1,5 brass (for oil filter flange Fiat 124 Spider ) Art.-Nr. 1062431
T piece with 3x M16x1,5 for oil filter flange to mount additional sensor. Additionally we need the T piece article no.:1162430
€12.90 *
Adapter screw connection M16x1,5 to M14x1,5 (for oil filter flange Fiat 124 Spider ) Art.-Nr. 1062433
Adapter screw connection M16 x 1.5 external thread to M 14 x 1.5 internal thread with 8 mm through hole. For mounting the originaloil pressure switch or oil pressure sensor in connection with the T-piece (art. no.: 1162431).
€6.95 *
Adapter screw connection M16x1,5 to M16x1,5 (for oil filter flange Fiat 124 Spider ) Art.-Nr. 1062434
Adapter screw connection M16x1.5 external thread to M 16x1.5 internal thread in connection with the T piece Art. No.: 1162431
€6.95 *
Disc for shock absorber rubber top, front and rear Fiat 124 Spider Art.-Nr. 1172093
Outer diameter: approx. 45.5 mm Inner diameter: approx. 35.0 mm Hole diameter: approx. 10.3 mm
€2.25 *
Rear transmission lock plate Fiat 124 Spider -Coupé, 125, 131, 132, Argenta Art.-Nr. 1178153
€2.95 *
Starter socket for starter Fiat 124 Spider (up to 78), 124 Coupé, 125, 131, 132, 1300-1500-2300,... Art.-Nr. 1184092
Suitable for starter with FIAT no. 5959702
€4.95 *
Clamp for tie rod Fiat 1300, Fiat 1500, Fiat 2300, Fiat Dino Art.-Nr. 1570001
Fiat 1300 / 1500 / 2300 Fiat Dino 2.0 / 2.4
€4.25 *
Starter Fiat 124 Spider (5.6kg) (+50€ deposit) Reconditioned Art.-Nr. 1184093
Bosch / Marelli
€274.95 *
Separator carburettor Fiat 124 Spider BS-CS (73-78), 124 Coupé BC-CC (spacer) Art.-Nr. 1164051
Pertinax spacer between carburettor and intake manifold. Please pay attention to the hole positionbs.
€24.95 *
Gasket carburettor foot carburettor Fiat 124 Spider, Fiat 131 (73-78) Art.-Nr. 1164016
The gasket is fitted above and below the spacer no.: 1164051 between the carburettor and the intake manifold. Pay attention to the hole positionbs. Attention for the assembly the gasket need 2x
€3.55 *
Bearing accelerator pedal on bulkhead below Fiat 124 Spider - used Art.-Nr. 1164180g
lower bearing half for early version with fixed throttle linkage up to Bj. 74
€13.25 *
Bearing accelerator pedal on top bulkhead Fiat 124 Spider - used Art.-Nr. 1164181g
upper bearing half for early version with fixed throttle linkage up to Bj. 74
€10.25 *
Throttle linkage between engine and bulkhead Fiat 124 Spider (up to 74) - Used Art.-Nr. 1164182g
Throttle linkage for early version with fixed linkage up to Bj. 74
€89.95 *
NEW
Spring for throttle linkage on bulkhead Fiat 124 Spider (up to 74) Art.-Nr. 1164183
Spring throttle linkage on bulkhead for early version with fixed linkage up to year 74
€9.95 *
Circlip for piston pin Art.-Nr. 1162058
Locking ring for piston pin all models except AS with shrink-on connecting rod. 2 are installed per piston pin
€2.45 *
Bearing block for tensioner pulley Timing belt Fiat 124 Spider 2000 (79-85) Art.-Nr. 1162131
€42.75 *
Recently Viewed