Products from S-Trd
No results were found for the filter!
Cylinder head screw M10x1.25x115 external hexagon Fiat 124 Spider (66-82), 124 Coupé, Fiat 125,... Art.-Nr. 1162035
Cylinderhead screw M10x1,25x115 external hexagon Thread size: M10 x 1,25mm Length: 115mm Tightening torque 85 nm
€5.95 *
Wheel bolt chrome-plated for CD 30 M12 x 1.25 x 30 mm Fiat 124 Spider Art.-Nr. 1130018
Width across flats: 19 Shaft length: 30 mm Length with taper: 38 mm Thread length: 25 mm
€6.90 *
Stabilizer rubber outside Fiat 124 Spider AS 1st series (66-68), DS (83-84), 124 Coupé AC (66-68)... Art.-Nr. 1172043
Fiat 124 Spider AS 66-68 inside and outside, DS from chassis no.: 5506003 / VX Inner diameter: 24 mm
€7.90 *
Shock absorber front gas pressure Fiat 124 Spider, 124 Coupé, 124 Berlina Art.-Nr. 1172039
Price quotation for 1x shock absorber; sold only as a set!
€57.95 *
Spark plug Marelli F 7 LCR Fiat 124 Spider 2000 Art.-Nr. 1184083
Price for one spark plug; can only be ordered as a set (4 pieces)! Long thread corresponds to CHAMPION N 9 YC
€3.99 *
NEW
Clip for side emblem / lettering all pinned Fiat 124 Spider, 850, 128 - Plastic grommet Art.-Nr. 1128004
Inner diameter: 3 mm Outer diameter: 4.7 mm Depth: 6.2 mm
€0.99 *
NEW
Rubber cap for temperature sensor / thermal sensor in the rear cylinder head Fiat 124 Spider, 124... Art.-Nr. 1160124
Rubber cap for water temperature sensor cable in cylinder head
€4.90 *
Fastening clammer for door/hood trim Fiat 124 Spider / 850 Spider / Dino Spider / X1/9 Art.-Nr. 1140126
€4.90 *
Piping for door windows and hood Fiat 124 Spider (set for both sides) Door hood trim strip piping Art.-Nr. 1114013
Set of rubber profile felted on the inside 2x piping for door mouldings + 2x piping for hood trim mouldings length: 250 cm Profile: 9 x 11 mm Thickness: 2.8 mm
Content 2.5 Linear metres (€7.96 * / 1 Linear metres)
€19.90 *
Chrome-plated washer nozzle with seal and nut Fiat 124 Spider, 500, 850, Dino Spider Art.-Nr. 1122019
Fiat 500 F/R - Fiat 850 N/S/Coupe Fiat 124 Coupe / Spider Fiat Dino Spider 3mm hose is required
€11.90 *
Rubber grommet for bumper holder Fiat 124 Spider (up to 74) Art.-Nr. 1126013
Dimensions: Length: 71 mm Height: 49 mm Length of slot: 42 mm Height of slot: 7 mm
€8.95 *
Rear brake caliper boot Fiat 124 Spider, 124 Coupé, 124 Berlina, 125, 132 GLS - Dust boot Art.-Nr. 1168054
Dust boot rear brake caliper. Covers handbrake mechanism. Can be used for 34 and 38 mm brake calipers.
€9.90 *
Threaded bush for door catch strap Fiat 124 Spider / Dino Spider Art.-Nr. 1114122
Length: 13.2 mm Outer diameter: 14 mm Outer diameter (installation): 10.5 mm Inner diameter: 5 mm Thread pitch: 1.25
€4.95 *
Tie rod sleeve complete Fiat 130 - Fiat Dino - Fiat 1500 Art.-Nr. 1070052
Length: 75 mm Fiat 130 Berlina/Coupé Fiat Dino Coupé /Spider Fiat 1500 Fiat 125 - Fiat 125 S
€21.90 *
Ignition contact set for bottom distributor Fiat 124 Spider AS-BS, Coupé 124 AC-BC, 238, 850 Art.-Nr. 1184031
Ignition contact set Fiat 124 Spider,124 Berlina, Spicial, Coupe, for bottom distributor with white cable 1400/1600
€14.95 *
Oil pressure switch Fiat 500 F/R - Fiat 126 - Fiat 600 D - Fiat 850 - Fiat 1500 (M12 original... Art.-Nr. 8562045
M 12 - original TRW/SIPEA Fiat 500 F/L/R - Fiat 500 F Giardiniera Fiat 126 - Fiat 126 P Fiat 600 D - Seat 770 S Fiat 850 N/S/Coupe/Spider Fiat 850 T - Fiat 900 T/E - Fiat 127 (900 cc) Fiat 1100 D/R - Fiat 13/1500 - Fiat 1500 C/L Fiat...
€7.90 *
Gasket for sheet metal strip windshield frame (one side) Fiat 124 Spider (66-82) Art.-Nr. 1122005
€14.75 *
Seal for sheet metal strip windscreen frame right Fiat 124 Spider DS (83-85), Dino Spider Art.-Nr. 1114120
For right side in direction of travel.
€21.95 *
Seal for sheet metal strip windscreen frame left Fiat 124 Spider DS (83-85), Dino Spider Art.-Nr. 1114121
For left side in direction of travel.
€21.95 *
Seal for radiator grille frame / radiator grille Fiat 124 Spider Art.-Nr. 1124009
Length 135 cm
Content 1.35 Linear metres (€5.15 * / 1 Linear metres)
€6.95 *
Nut for crankshaft front Fiat 124 Spider (66-82), Coupé, Fiat 125, 128, 131, X 1/9, Lancia Beta Art.-Nr. 1162089
Nut (M 20 X 1,5) belt pulley crankshaft front SW 38 right-hand thread 1400-2000 Until Bj. 82 ( from 83 article no.:1162087) 38 nut article no.:1163210
€19.95 *
Recently Viewed