No results were found for the filter!
Piston ring set 84mm (for 4 pistons) Fiat 124 Spider 1800-2000, 124 Coupé, 131, 132, Lancia Beta Art.-Nr. 1162515.0
€99.90 *
Piston ring set 80mm (for 4 pistons) Fiat 124 Spider 1400-1600, 124 Coupé Art.-Nr. 1162514.1
From €89.00 *
Shaft seal crankshaft front 56x40x7 Fiat 124 Spider, 124 Coupé, 125, 128, X1/9 Art.-Nr. 1162103
Fiat 124 Coupé / Spider Fiat 125 - Fiat 125 S Fiat X 1/9 - Fiat 128
€5.95 *
Nut for connecting rod bolt 2000 (79-85) Fiat 124 Spider, Lancia Beta Art.-Nr. 1162308
For engine type 132 from year of construction 79-85 2000s
€7.50 *
Piston set 84mm and piston ring set Fiat 124 Spider 1800-2000, 124 Coupé 1800, 131, 132, Lancia Beta Art.-Nr. 1162513.12
From €349.90 *
Nut for crankshaft front Fiat 124 Spider (66-82), Coupé, Fiat 125, 128, 131, X 1/9, Lancia Beta Art.-Nr. 1162089
Nut (M 20 X 1,5) belt pulley crankshaft front SW 38 right-hand thread 1400-2000 Until Bj. 82 ( from 83 article no.:1162087) 38 nut article no.:1163210
€18.90 *
Drive pinion toothed belt on crankshaft Fiat 124 Spider (66-74), 124 Coupé Art.-Nr. 1162115
With inner diameter 29 mm
€55.00 *
Drive pinion toothed belt crankshaft Fiat 124 Spider 1800-2000 (75-85), 124 Coupé, Fiat 128, 131,... Art.-Nr. 1162116
Made of metal Inner diameter 30 mm
€57.00 *
Guide bearing 35mm in crankshaft 1966-8/1983 Fiat 124 Spider /Coupé / 125 Art.-Nr. 1180018
Diameter: 35 mm
€7.90 *
Crankshaft bearing shell set standard TYPE 132 Fiat 124 Spider 1800-2000 (73-85) - Original Art.-Nr. 1162423o
€64.95 *
Shaft seal engine crankshaft rear 90x74x10 Fiat 124 Spider (75-85), 124 Coupé Art.-Nr. 1162109
Item may differ from picture.
€9.90 *
Connecting rod bearing shells set 2. Oversize TYPE 132 Fiat 124 Spider 1800-2000 (from 75) Art.-Nr. 1162257
2. oversize 0,508mm, set (8 pieces) 1800/2000ccm ( crankshaft front with pulley for several belts)
€85.00 *
Guide bearing in crankshaft (32mm) Fiat 124 Spider DS-VX (from 9/1983) - Pilot bearing Art.-Nr. 1180020
Guide bearing / pilot bearing diameter 32 mm Crankshaft rear from year 9/83 (crankshaft with SW27 left-hand thread screw front)
€9.95 *
Crankshaft bearing shell set standard TYPE 132 1800 -2000 (73-85) Fiat 124 Spider, Coupé Art.-Nr. 1162300
Crankshaft bearing shell set standard engine TYPE 132 1600/1800/2000ccm
€50.00 *
Crankshaft bearing shells set 1. Oversize engine type 132 Fiat 124 Spider 1800-2000, 124 Coupé 1800 Art.-Nr. 1162301
Crankshaft bearing shell set 1st oversize - 0,254mm Engine TYPE 132 1600/1800/2000ccm
€49.50 *
Thrust washers crankshaft GLYCO Standard TYPE 132 16/18/2000 Fiat 124 Spider (73-85) Art.-Nr. 1162304
€16.50 *
Piston set (84 mm STD) with dome 3rd stage 8 mm Fiat 124 Spider 1800-2000, 124 Coupé 1800 Art.-Nr. 1162330
Scope of delivery: piston set 4 pieces, 4x piston pin, 8 circlips for piston pin Attention ! When using the 3rd compression stage (8mm dome), only fuel with 100 octane should be used ! For Spidern with injection engines, these pistons...
€275.00 *
Piston set with piston ring set 84mm (+0.4) with 1.9 mm dome Fiat 124 Spider 1800-2000, 124 Coupé... Art.-Nr. 1162532
Scope of delivery: piston set 4 pieces, 4x piston pin, 8 circlips for piston pin
€449.00 *
Pulley on crankshaft USED new galvanised 2000er Fiat 124 Spider Art.-Nr. 1160042g
Diameter of individual pulleys: 92 mm 121 mm 70 mm
€134.90 *
Piston set 14/1600 (80mm +0,6) with dome 2nd stage 5mm Fiat 124 Spider, Coupé Art.-Nr. 1162060
Piston set 3rd oversize 80.60 mm with dome height 5mm, for shrinking! Scope of delivery: piston set 4 pieces, 4x piston pin
€290.00 *
Screw for crankshaft front Fiat 124 Spider (83-85) left-hand thread Art.-Nr. 1162087
Screw V-belt pulley crankshaft from year of manufacture '83. Since this screw has a left-hand thread and can practically not come loose, it is fixed with a maximum of 80 Nm! M14 x 55 x 1,5 Width across flats 22mm
€16.90 *
Crankshaft bearing shell set standard engine type 124-125 (1400-1600) Fiat 124 Spider, 124 Coupé,... Art.-Nr. 1162090
Bearing shell set Standard Engine type 124/125 1400/1600 66-72
€49.00 *
Crankshaft bearing shell set 1st oversize (0.254 mm) 1400-1600 (66-73) Fiat 124 Spider, Coupé, 125 Art.-Nr. 1162091
Bearing shell set 1st oversize - 0.254mm Engine type 124/125 1400/1600 Fiat 124 Sport AC/AS Fiat 124 Sport BC/BS Fiat 125 - Fiat 125 S Fiat X 1/9 1300
€57.50 *
Connecting rod bearing set standard TYPE 132 Fiat 124 Spider 1800/2000 (from 75), 124 Coupé Art.-Nr. 1162097
Standard, set (8 pieces) 1800/2000 engine (front crankshaft with pulley for several belts)
€49.90 *
Connecting rod bearing shells set 1. Oversize TYPE 132 Fiat 124 Spider (from 75) 1800-2000 Art.-Nr. 1162098
1. oversize - 0,254 mm, set (8 pieces) engine type 123 1800/2000ccm ( pulley on crankshaft for several belts )
€85.00 *
Thrust washers crankshaft GLYCO zero size TYPE 124/125, Fiat 124 Spider 1400-1600 (66-73), 124 Coupé Art.-Nr. 1162099
€16.50 *
Crankshaft thrust washers (1st oversize) Engine type 124-125 Fiat 124 Spider (66-73), 124 Coupé... Art.-Nr. 1162100
Set of thrust washers for crankshaft (1st oversize) For engines with 1438 cc and 1608 cc displacement.
€49.95 *
Seal shaft seal flange engine/crankshaft rear Fiat 124 Spider (66-85), 124 Coupé, Fiat 125 Art.-Nr. 1162106
€4.29 *
Shaft seal engine crankshaft rear 90x70x10 Fiat 124 Spider (66-74), 124 Coupé, 125 Art.-Nr. 1162108
Item is similar to the picture
€7.95 *
Recently Viewed