Crankshaft 1800/2000- Fiat 124 Spider

Standard size, set (8 pieces) Asynchronous oil bores !!!! (1592/1756 to 75 1800 crankshaft front with pulley for one belt) up to engine number 402685

1. oversize 0.254mm, set (8 pieces) Asynchronous oil holes !!!! (1800 crankshaft front with pulley for one belt) up to engine number 402685

4.. Oversize bearing shells thickness 2.08 mm, set (8 pieces) 1800/2000cc ( crankshaft front with pulley for several belts )

for engine code: Lancia 828.B1.000 Fiat 131 C4.000 - 132AC.000 - 132 B1.000 - 132 C3.000 - 132 C2.000 - 132 C3.031 Ducato 230L 1,9 -230 A2.000 - Ducato 290 1,9 - 149 B1.000 Fiorino Diesel 1,7 - 149 B2.000 Regata Diesel 1,7 - 138...

2. oversize 0,508mm, set (8 pieces) 1800/2000ccm ( crankshaft front with pulley for several belts)

1. oversize - 0,254 mm, set (8 pieces) engine type 123 1800/2000ccm ( pulley on crankshaft for several belts )

Standard, set (8 pieces) 1800/2000 engine (front crankshaft with pulley for several belts)

Locking ring for piston pin all models except AS with shrink-on connecting rod. 2 are installed per piston pin

For CS2 / CS0 / DS / not VX used

For engine type 132 from year of construction 79-85 2000s  

Crankshaft is supplied with corresponding bearing shells. The crankshaft has been reworked (ground, oil plugs removed and oil channels cleaned).

Crankshaft is supplied with corresponding bearing shells. The crankshaft has been reworked (ground, oil plugs removed and oil channels cleaned).

Crankshaft is supplied with corresponding bearing shells. The crankshaft has been reworked (ground, oil plugs removed and oil channels cleaned).

Crankshaft is supplied with corresponding bearing shells. The crankshaft has been reworked (ground, oil plugs removed and oil channels cleaned).

Crankshaft is supplied with corresponding bearing shells. The crankshaft has been reworked (ground, oil plugs removed and oil ducts cleaned). Please note: An old part that needs to be reworked must be returned for a deposit of 300...

Screw V-belt pulley crankshaft from year of manufacture '83. Since this screw has a left-hand thread and can practically not come loose, it is fixed with a maximum of 80 Nm! Width across flats 22mm

Nut (M 20 X 1,5) belt pulley crankshaft front SW 38 right-hand thread 1400-2000 Until Bj. 82 ( from 83 article no.:1162087) 38 nut article no.:1163210

Socket (3/4") SW 38mm

Crankshaft bearing shell set standard engine TYPE 132 1600/1800/2000ccm

Crankshaft bearing shell set 1st oversize - 0,254mm Engine TYPE 132 1600/1800/2000ccm

Crankshaft bearing shell set 2nd oversize - 0,508mm Engine TYPE 132 1800/2000ccm

Crankshaft Bearing Shell Set 1st Oversize - 0.254mm Engine TYPE 132 1592 cc

Thrust washer set 2 pieces oversize

Flywheel with sprocket for 35 mm pilot bearing, 12 mm bore for crankshaft mounting, for 18/2000 78-82, clutch discs diameter 215 mm. The flywheel installed at original has a weight of 8 kg. Therefore, you save a whole 2.62 kg in...

Flywheel with sprocket for 35 mm pilot bearing, 12 mm bore for crankshaft mounting, for 18/2000 78-82 , clutch disc diameter 215 mm. This is a regenerated spare part.

Flywheel with sprocket for 35 mm pilot bearing, 10 mm bore for crankshaft mounting, for 16/1800 up to Bj. 78, clutch discs diameter 215 mm. This is a regenerated spare part.

Flywheel with ring gear for 32 mm pilot bearing, 12 mm bore for crankshaft mounting, for 2000 82-85, clutch discs diameter 215 mm. This is a regenerated spare part.

Flywheel with sprocket Automatic until Bj. 83 used

Gear rim for flywheel 71-85 134 teeth

Washer/Fuse plate For flywheel

High-strength bolt M10x1,25 for flywheel up to Bj 77

Set: 6x high-strength screw M 12 for flywheel 76-85

Washer For flywheel

Diameter: 35 mm

Guide bearing / pilot bearing diameter 32 mm Crankshaft rear from year 9/83 (crankshaft with SW27 left-hand thread screw front)