Ignition, Distributor - Fiat 124 Spider

Inductive sensor for ignition distributor Fiat 124 Spider (white cable) Hall sensor ignition pulse Fiat 124 Spider CS2 / CS0 / DS / 2000 ie & carburettor / VX Lancia A112 Abarth The white cable has a length of approx. 71cm

Fits perfectly to all Fiat 124 Spider engines with distributor on the exhaust camshaft. Comes with two coil wires so it is suitable for both left and right mounted coils.

Consisting of distributor cap, distributor finger and inductive sensor for Fiat 124 Spider (2000) Length of the cable (including plug) approx. 90 cm

Distributor cap brown with side outlets for round distributor fingers. Fiat 124 Spider 2000 Fiat Argenta 81-85 Fiat 131 2000 US Lancia/Autobianchi A 112 1.0 E, Elite, LX, Abarth Lancia Beta Montecarlo 2nd series

Round distributor finger, black, like original, for distributor cap with side outlets. Suitable for various FIAT models: Fiat 124 Spider 2000 79-85 Fiat 125 1968-70 Fiat 131 1978-84 Fiat Argenta 2000 1981-85 Fiat Ritmo 125/130 TC Lancia...

Fiat 124 Spider/Coupe 1592 and 1756 ccm 1973 - 1977 Fiat 128 Coupé Fiat 131 Fiat Dino Lancia Beta Montecarlo For distributor cap Art. No.: 1184030

Fits perfectly to all Fiat 124 Spider engines with distributor on the exhaust camshaft. Comes with two coil wires so it is suitable for both left and right mounted coils.

Ignition distributor Fiat 124 Spider 2000ie (CS0, CS2, DS) ATTENTION: Grease the shafts before installation!

Gasket for ignition distributor at the bottom of the engine block. For Fiat 124 Spider / Coupe Inner diameter 37mm Outer diameter 46mm

Distributor cap AS/BS Fiat 124 Spider / Coupe for bottom-mounted distributor Distributor Marelli S124B with notch 17 mm With notch at the bottom!

Round brown AS BS distributor rotor for under-mounted distributor, Fiat 124 Spider/Coupé / 850 Diameter: 63 mm Fiat 850 1969-76 Fiat 124 1968-73 Fiat 238 Fiat 127 1971-75 Fiat 131 13/1600 1974-75 Lancia Fulvia HF - Lancia A 112 1970-71

Noise suppression capacitor The housing must be attached to earth and the clamp on the cable to the positive pole.

7 mm silicone cable black

Attention: For all Fiat 124 Spider vehicles from 1973 on which the 6-pin compact plug is located in front of the ignition lock, we recommend that a relay combination item no.: 1184060 be installed with the new ignition lock. Then only...

Gasket for ignition distributor on top of cylinder head Fiat 124 Spider / Coupe Diameter inside = 38mm Diameter outside = 46mm

Ignition coil 2000 79 - 85 with holder NGK. For Fiat 124 Spider models with electronic ignition

Ignition contact set Fiat 124 Spider bottom distributor manufacturer Ducellier for 14/1600, also Fiat 850, 127, 128

Fiat 124 Spider/Coupe BS/BS/CS1/ BC/CC 1608 and 1756 cc 1971 - 1978 Abstand from distributor cap edge to contact 63 mm. For Marelli Ignition distributor S144B

Ignition contact set Fiat 124 Spider/Coupe for overhead distributor 1600/1800 and for 1800 US with double contact. Also Fiat 130, Fiat 131 1,3, Fiat 132 1,6, Fiat 127, Fiat 238, Fiat 242 1,6, Lancia Beta 1,3 - 1,4 - 1,6 - 1,8, Lancia A...

Manufacturer Facet, Made in Italy. More durable than standard quality (art. no. 1184100) Fiat 124 Spider 2000 (79-85) Fiat 125 (68-70) Fiat 131 (78-84) Fiat Argenta 2000 (81-85) Fiat Ritmo 125/130 TC Lancia A112 (79-86) Lancia Beta (79-82)

bsDue to the higher ignitiondsvoltage of the high-performance ignitiondscoil, the electrode gaps can be enlarged. This ensures better power development, smoother engine running and lower fuel consumption. These ignitiondscoils have an...

Premium quality; from well-known manufacturers such as Facet Fiat 124 Spider 2000 Fiat Argenta (81-85) Fiat 131 2000 (US) Lancia /Autobianchi A 112 1,0 E, Elite, LX , Abarth

Distributor cap AS/BS Fiat 124 Spider / Coupe for bottom-mounted Marelli S124B distributor Dimensions: Length of alignment lug: 7 mm Height from contact base: approx. 65 mm