Ignition, Distributor - Fiat 124 Spider

Inductive sensor for ignition distributor Fiat 124 Spider (white cable) Hall sensor ignition pulse Fiat 124 Spider CS2 / CS0 / DS / 2000 ie & carburettor / VX Lancia A112 Abarth The white cable has a length of approx. 71cm

Fits perfectly to all Fiat 124 Spider engines with distributor on the exhaust camshaft. Comes with two coil wires so it is suitable for both left and right mounted coils.

Price for one spark plug; can only be ordered as a set (4 pieces)! Long thread corresponds to CHAMPION N 9 YC

Gasket for ignition distributor at the bottom of the engine block. For Fiat 124 Spider / Coupe Inner diameter 37mm Outer diameter 46mm

Gasket for ignition distributor on top of cylinder head Fiat 124 Spider / Coupe Diameter inside = 38mm Diameter outside = 46mm

Fiat 124 Spider/Coupe 1592 and 1756 ccm 1973 - 1977 Fiat 128 Coupé Fiat 131 Fiat Dino Lancia Beta Montecarlo For distributor cap Art. No.: 1184030

7 mm silicone cable black

Attention: For all Fiat 124 Spider vehicles from 1973 on which the 6-pin compact plug is located in front of the ignition lock, we recommend that a relay combination item no.: 1184060 be installed with the new ignition lock. Then only...

Round brown AS BS distributor rotor for under-mounted distributor, Fiat 124 Spider/Coupé / 850 Diameter: 63 mm Fiat 850 1969-76 Fiat 124 1968-73 Fiat 238 Fiat 127 1971-75 Fiat 131 13/1600 1974-75 Lancia Fulvia HF - Lancia A 112 1970-71

Ignition contact set Fiat 124 Spider,124 Berlina, Spicial, Coupe, for bottom distributor with white cable 1400/1600

Ignition contact set Fiat 124 Spider/Coupe for overhead distributor 1600/1800 and for 1800 US with double contact. Also Fiat 130, Fiat 131 1,3, Fiat 132 1,6, Fiat 127, Fiat 238, Fiat 242 1,6, Lancia Beta 1,3 - 1,4 - 1,6 - 1,8, Lancia A...

bsDue to the higher ignitiondsvoltage of the high-performance ignitiondscoil, the electrode gaps can be enlarged. This ensures better power development, smoother engine running and lower fuel consumption. These ignitiondscoils have an...

Make your engine bay stand out, both visually and performance-wise, with this high-performance ignition cable set. Flame-Thrower 7mm MAGx2 cables offer the igndstrom 2 ways to reach its target for reliability and redundancy. A low...

Higher temperature resistance Material: FKM/Viton Outer diameter: 28 mm Inner diameter: 12 mm Height: 7 mm

Distributor cap AS/BS Fiat 124 Spider / Coupe for bottom-mounted Marelli S124B distributor Dimensions: Length of alignment lug: 7 mm Height from contact base: approx. 65 mm

Fiat 124 Spider/Coupe 1592 and 1756 ccm 1973 - 1977 (with long carbon pin) Abstand from distributor cap edge to contact 51 mm

for Fiat 500-600-850-1100-1500-124-125 ... As an alternative, we recommend the much higher quality ignition coil from NGK (Art. No. 1184121)!

This distributor was developed for the 4-cylinder machines of the FIAT 124, 131, Coupe, Spider and Abarth with double camshaft engines. It replaces the original distributor, which sits on the cylinder head. The distributor has 16 preset...

The distributor is mounted on the front left.

Ignition distributor top S144B for BS/BS1/CS1 with L-shaped finger AT Fiat 124 Spider / Coupe My.: 1971 - 1978. Distributor cap, finger, ignition contact, condenser as well as ball bearing, oil ring and sealing rings are renewed. This is...

Ignition distributor Fiat 124 Spider 2000ie (CS0, CS2, DS) ATTENTION: Grease the shafts before installation!

ATTENTION: Grease the shafts before installation!

Material: NBR Outer diameter: 28 mm Inner diameter: 12 mm Height: 7 mm