Rear Axle - Fiat 124 Spider

Seal for rear axles with rear cover

Differential seal paper 66-77 For all models where the differential can be removed to the front.

Cross member straight BS,CS 69-78 Fiat 124 Spider, Coupé BC,CC - Panhardstab strut rear axle Hole spacing 1010mm, hole diameter 12mm

Hole abstand approx. 935 mm, hole diameter 15 mm

Fiat 124 N/S Fiat 124 Coupé/Spider Fiat 131 - Fiat 238

Sits directly on body, also requires item no.: 1174036 Spring seat ring metal

Spring seat ring top metal for suspension rear axle directly on spring Additionally article no.:1174037 Rubber ring for spring rear axle top is needed.  

Lowering springs as a set suitable for all Fiat 124 Spider/Coupé Approx. 35mm lower with Tüv certificate Colour: blue Spring length front: 305mm Spring length rear: 445mm NOW NEW: With resonance damper (prevents rattling...

Original coil spring rear axle Length: 460 mm Diameter: 127 mm Spring wire diameter: 12.4 mm For left or right All Fiat 124 Spider

Price information for 1x shock absorber; Selling as a set only! In combination with "rear shock absorber mount up to 78 Fiat 124 Spider, Coupé - rear axle" (item no. 1174029) can also be used for AS 1st series.

Price information for 1x shock absorber; Selling as a set only! In combination with "rear shock absorber mount up to 78 Fiat 124 Spider, Coupé - rear axle" (item no. 1174029) can also be used for AS 1st series.

Set shock absorber gas pressure 2x "Shock absorber front gas pressure AS/BS/CS/DS Fiat 124 Spider " Article Nr 1172039 2x "Rear shock absorber gas pressure 69-85 Fiat 124 Spider / Coupe " Article No 1174032 Fiat 124 N/S...

Price quotation for 1x shock absorber; sold only as a set! Shock absorber Spax adjustable from the outside in installed condition

Price quotation for 1x shock absorber; sold only as a set! Shock absorber AS 1st series 66-68 lower mount for 2 vertical bolts. Alternative: use shock absorber from year of construction: 69 with lower holder article no.:1174029

   

Screw cross strut to body and compression strut to axle beam M12x1.25x70  

Screw long for mounting compression strut on body Fiat 124 Spider / Coupe / Sedan

Screw for fastening longitudinal strut in axle beam and to body Fiat 124 Spider / Coupe / Saloon and screw for hardy washer  

Rubber beech for trailing arm and cross strut (Panhardstab) Fiat 124 Spider to 78 2 pieces are needed per strut Width: 43mm Height: 40mm

Short strut with small rubber bushes up to Bj 78  

Two rubber bushings are required for one end of the push rod Dimensions: Inner diameter: 20 mm Outer diameter: 40 mm Width 25 mm

Short strut with large rubber bushes from year of construction '79. Hole spacing: 300 mm

Hole spacing: 617 mm

Longitudinal strut mount on body

Oil drain plug hexagon socket with magnet

Oil filler plug with external hexagon 17mm conical sealing thread 22x1.5 - Rear axle - Gearbox Lateral for gearbox oil check and filling - Oil pan  

The part is welded to the axle beam. For right side in direction of travel.

The part is welded to the axle carrier. For left side in direction of travel.

Hole spacing: 614 mm Fiat 124 Coupe BC/CC 16/1800 Fiat 124 Spider BS/CS 16/1800

Outer diameter: approx. 45.5 mm Inner diameter: approx. 35.0 mm Hole diameter: approx. 10.3 mm

Only fits original shock absorbers Dimensions: Outer diameter: 40 mm Inner diameter: 14 mm Height: 15 mm

Rear axle housing overhauled (de-laminated, degreased, repainted)

Sealing ring for thru axle 65 x 2 mm

Shrink ring for wheel bearing on drive shaftbs Outer diameter: 47 mm Inner diameter: 30 mm Height: 13.5 mm

Not for 124 Spider CSA! Dimensions: Outer diameter: 65 mm Inner diameter: 30 mm Width: 21 mm

Circlip for thru axle 14/16/1800 to 78 Inner diameter: 62mm Outer diameter: 70mm  

Price information for 1x shock absorber; Selling as a set only! In combination with "rear shock absorber mount up to 78 Fiat 124 Spider, Coupé - rear axle" (item no. 1174029) can also be used for AS 1st series.

Contents: 1x wheel bearing 1174023 1x oil seal 1174027 1x shrink ring 1174024 1x gasket 1174026

Ready to install with quick release axles and oil filled. With new plate bevel gear. Axle width: 125 cm Overtaking the rear axles of Spiders with 2-liter engines can only be done with a special tool that almost no one has anymore!...

Ready to install with quick release axles and filled with oil. With new plate bevel gear. Axle width: 122.5 cm Overtaking the rear axles of Spiders with 2-liter engines can only be done with a special tool that almost no one has...

Two-part version of the rubber bushing in the push rods for simplified assembly. 4 bushings are required per rod! Made in Italy. Outer diameter: 40 mm Inner diameter: 18 mm Width: 22 mm

Fiat X 1/9 1500 rear Lancia Beta front/rear Lancia Gamma rear Dimensions: Outer diameter: 72 mm Inner diameter: 37 mm Width: 37 mm

Outer diameter: approx. 47,5 mm

Polyurethane (PU) is a very durable and resilient material. The rubbers offer a stable and sporty driving experience. Dimensions: Inner diameter: 14 mm Outer diameter: 41 mm

4 pieces are needed per strut! The bushings fit, but must be ground down on the outside after being pressed in! Diameter approx. 34 mm Height 23 mm

Overhaul kit rear axle PU bushings red Fiat 124 Spider Consisting of: 4x bushing for longitudinal strut, 4x bushing for shockbsstrut, 2x bushing for anti-roll bar and 4x bushing for upper shock absorber. Polyurethane (PU) is a very...

Front inner diameter 21 mm Fiat 124 Coupé AC to VIN 066058 Fiat 124 Spider AS to VIN 066058

Fiat 127 Fiat 128 Fiat 124 Spider CSA Lancia A 112

Fiat 124 N/S Fiat 124 Coupé Fiat 124 Spider