Fuel pump for carburettor Fiat 124 Spider, 124 Coupé (electric) (follow assembly instructions) buy spare parts

Preview: Fuel pump for carburettor Fiat 124 Spider, 124 Coupé (electric) (follow assembly instructions)

Fuel pump for carburettor Fiat 124 Spider, 124 Coupé (electric) (follow assembly instructions)

Not in stock

Please inform me as soon as the product is available again.

€49.95 *

incl. VAT and plus shipping costs

Not in stock! Maybe can be delivered later

Request

Article number: 1164073
Comparison no.: 53285

Close menu

Product information "Fuel pump for carburettor Fiat 124 Spider, 124 Coupé (electric) (follow assembly instructions)"

Vane pump incl. mounting material can be used for Fiat 124 Spider up to year of construction 79.

Attention: If your pump is defective, be sure to check whether there is rust or other impurities in your tank, as the fuel is only cleaned after the pump! If you do not take this into account, the new pump will also fail quickly!

Info:

The fuel pump draws fuel from the tank and pushes it via a ring line to the electromagnetically operated injection valves and the electric start valve. The fuel pressure is kept constant by a fuel regulator.

The excess fuel flows back to the tank without pressure. A fuel filter between the fuel pump and the injection valves retains impurities.

When the ignition is switched on, the pump only runs as long as the starter is operated. If the engine is running, the electronic control unit switches the pump on. This safety circuit prevents the cylinders from filling up with fuel when the ignition is switched on (full-run safety device).

Goods area:	Engine, Fuel-air system
Quality:	4 - Replica Standard
Condition:	New

Related Links

Ask a question about the item

Manufacturer	Model (check type)	Type
FIAT	124 Coupe	AC (1400) BC (1400) BC1 (1600) CC (1600)
FIAT	124 Spider	AS (1400) BS (1400) BS1 (1600) CS (1600) CS1 (1800) CS2 (2000) CSA (1800)

Caution: If your pump is defective, be sure to check whether there is rust or other contaminants in your tank, as the fuel is only cleaned after the pump! If you do not take this into account, the new pump will also quickly fail!

Info:

The fuel pump sucks the fuel from the tank and pushes it through a ring line to the electromagnetically actuated injection valves and the electric starter valve. The fuel pressure is kept constant by a fuel regulator.

The excess fuel flows back to the tank without pressure. A fuel filter between the fuel pump and the injectors keeps dirt out.

When the ignition is switched on, the pump only runs as long as the starter is operated. When the engine is running, the electronic control unit switches the pump on. This safety circuit prevents the cylinders from filling up with fuel when the ignition is switched on (full flow protection).